Date: Fri, 28 Jul 2000 15:10:50 GMT From: "Harris Kauffman" <hpk104@hotmail.com> To: mobile@freebsd.org Subject: help w/ pcmcia NIC Message-ID: <F122EqxGGmNN79xavjr000001cd@hotmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_47cf_2a38$489e Content-Type: text/plain; format=flowed I have a Netgear FA410TX which I am having trouble configuring correctly with a fresh install of 4.1-release. I have been using FreeBSD for about 3 years now, but this is my first attempt at an install on a laptop. After creating a custom kernel, setting pccard_enable="YES" in rc.conf, and making sure the netgear card is set irq 10 I have come upon problem. It looks as if pccardd detects the card, and correctly identifies it as a FA410TX, but when i try to start the network, either with a static IP or through DHCP I get "ed0: device timeout". I don't believe that it is an IRQ conflict on the part of the ethernet card, as nothing else is on irq 10. I am stuck as to what to try next. Attached are the output of dmesg and of pccardc dumpcis. Any advice would be greatly, greatly appreciated. TIA, Harris ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ------=_NextPart_000_47cf_2a38$489e Content-Type: text/plain; name="Dmesg.txt"; format=flowed Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="Dmesg.txt" Rebooting... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #10: Fri Jul 28 10:47:29 GMT 2000 root@:/usr/src/sys/compile/FREEBSD Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (597.07-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 66977792 (65408K bytes) avail memory = 62013440 (60560K bytes) Preloaded elf kernel "kernel" at 0xc031d000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031d09c. VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02c7a82 (1000022) VESA: S3 Incorporated. M7 BIOS Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11 intpm0: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f irq 9 at device 5.3 on pci0 intpm0: I/O mapped fe70 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped fe00 pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 11 chip1: <ESS Technology Maestro 2E Audio controller> port 0xfc00-0xfcff irq 11 at device 12.0 on pci0 eisa0: <EISA bus> on motherboard eisa0: unknown card @@@0000 (0x00000000) at slot 1 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A pcic0: <Intel i82365> at port 0x3e0-0x3e1 irq 3 on isa0 pcic0: management irq 3 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port pccard: card inserted, slot 1 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 5729MB <IBM-DARA-206000> [12416/15/63] at ata0-master using UDMA33 acd0: DVD-ROM <DV-28E-0> at ata1-master using UDMA33 Mounting root from ufs:/dev/ad0s2a ed0 at port 0x300-0x31f irq 10 slot 1 on pccard1 ed0: address 00:e0:98:78:68:aa, type Linksys (16 bit) ed0: device timeout ed0: device timeout ed0: device timeout ed0: device timeout ed0: device timeout ------=_NextPart_000_47cf_2a38$489e Content-Type: text/plain; name="Tuple.txt"; format=flowed Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="Tuple.txt" Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: d1 3a ff Common memory device information: Device number 1, type Function specific, WPS = OFF Speed = 250nS, Memory block size = 8Kb, 8 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 41 00 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 250nS, Memory block size = 512b, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 49 01 30 02 PCMCIA ID = 0x149, OEM ID = 0x230 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 01 Network/LAN adapter - POST initialize Tuple #5, code = 0x15 (Version 1 info), length = 33 000: 04 01 4e 45 54 47 45 41 52 00 46 41 34 31 30 54 010: 58 00 46 61 73 74 20 45 74 68 65 72 6e 65 74 00 020: ff Version = 4.1, Manuf = [NETGEAR], card vers = [FA410TX] Addit. info = [Fast Ethernet] Tuple #6, code = 0x1a (Configuration map), length = 5 000: 01 20 00 04 0b Reg len = 2, config register addr = 0x400, last config = 0x20 Registers: XX-X---- Tuple #7, code = 0x1b (Configuration entry), length = 7 000: e0 81 18 45 30 fc be Config index = 0x20(default) Interface byte = 0x81 (I/O) wait signal supported Card decodes 5 address lines, limited 8/16 Bit I/O IRQ modes: Level IRQs: 2 3 4 5 6 7 9 10 11 12 13 15 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 01 08 ca 60 00 03 1f Config index = 0x1 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x300 block length = 0x20 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 02 08 ca 60 20 03 1f Config index = 0x2 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x320 block length = 0x20 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 03 08 ca 60 40 03 1f Config index = 0x3 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x340 block length = 0x20 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 04 08 ca 60 80 03 1f Config index = 0x4 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x380 block length = 0x20 Tuple #12, code = 0x14 (No link), length = 0 Tuple #13, code = 0xff (Terminator), length = 0 2 slots found ------=_NextPart_000_47cf_2a38$489e-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F122EqxGGmNN79xavjr000001cd>