Date: Sat, 2 May 2020 17:59:20 +0200 From: Christoph Kukulies <kuku@kukulies.org> To: freebsd-questions@freebsd.org Subject: Re: sym0 weirdness Message-ID: <F1D07139-8B18-4EF4-AE53-FBBCF92FD932@kukulies.org> In-Reply-To: <4f1729b9-5c8c-26d1-8a64-e7c17eecffb2@kukulies.org> References: <373ced34-1fe5-c385-e2c4-20cc6f46d9f0@kukulies.org> <4f1729b9-5c8c-26d1-8a64-e7c17eecffb2@kukulies.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Another gotcha: I had some other cards using the Symbios 53C810, this time an ASUS = SC-200 PCI board and tried that with the GENERIC kernel (which has the sym driver built in). The ASUS SC-200 board isn=E2=80=99t recognized at all by the kernel.=20 I=E2=80=99m baffled. (!?) =E2=80=94 Christoph > Am 02.05.2020 um 13:08 schrieb Christoph P.U. Kukulies = <kuku@kukulies.org>: >=20 > Seems that HTML coded Email doesn't get through. Should have known = that :) >=20 > Here is the content: >=20 >=20 > Am 02.05.2020 um 10:27 schrieb Christoph P.U. Kukulies: >>=20 >> I'm trying to connect and detect some SCSI device on an externanally = connected SCSI bus. >>=20 >> Controller is a Symbios PCI card 2520. >>=20 >> With the cable connected and one device at the end of the bus (1,5m = cable, internally terminated by the SCSI2D controller card), I'm always = getting camcontrol rescan all to hang, =C3=BCroducing lots of errers = then in the dmesg. >>=20 >> This is the picture right after system boot: >>=20 >> sym0: <810> mem 0xc0000000-0xc000000f irq 20 at device 5.0 on pci4 >> sym0: No NVRAM, ID 7, Fast-10, SE, parity checking >> CACHE TEST FAILED: reg dstat-sstat2 readback ffffffff. >> sym0: CACHE INCORRECTLY CONFIGURED. >> device_attach: sym0 attach returned 6 >>=20 >>=20 >> Now, when I use camcontrol to detect my SCSI devices connected to = sym0, all I get listed are my hard disks: >>=20 >>=20 >> # camcontrol devlist >> <KINGSTON SA400S37240G SBFKB1D1> at scbus0 target 0 lun 0 = (ada0,pass0) >> <WDC WD10EADS-22M2B0 01.00A01> at scbus1 target 0 lun 0 = (ada1,pass1) >> <Samsung SSD 840 EVO 120GB EXT0AB0Q> at scbus2 target 0 lun 0 = (ada2,pass2) >> <SAMSUNG HD502HJ 1AJ100E4> at scbus3 target 0 lun 0 = (ada3,pass3) >> <Verbatim STORE N GO 1.00> at scbus7 target 0 lun 0 = (pass4,da0) >> # camcontrol devlist -b 1 >> scbus0 on ahcich0 bus 0 >> scbus1 on ahcich1 bus 0 >> scbus2 on ahcich2 bus 0 >> scbus3 on ahcich3 bus 0 >> scbus4 on ahcich4 bus 0 >> scbus5 on ahcich5 bus 0 >> scbus6 on ata1 bus 0 >> scbus7 on umass-sim0 bus 0 >> scbus-1 on xpt0 bus 0 >>=20 >> Clueless. >>=20 >>=20 >> -- >>=20 >> Christoph >>=20 >=20 > Am 02.05.2020 um 10:27 schrieb Christoph P.U. Kukulies: >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org" >=20 >=20 > _______________________________________________ > freebsd-questions@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to = "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F1D07139-8B18-4EF4-AE53-FBBCF92FD932>