Date: Sat, 9 May 2015 19:03:34 -0700 From: Tim Kientzle <tim@kientzle.com> To: Luis Alberto Gonzalez Alvarez <alberto.bsd@gmail.com> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Message-ID: <FB557317-8B5D-491D-AA26-890381CBEAE6@kientzle.com> In-Reply-To: <CACNMU8pnU_aUw_sLrPtDTwt0u_sxtHizdW1X7j2bf8QS=z8mkw@mail.gmail.com> References: <CACNMU8pnU_aUw_sLrPtDTwt0u_sxtHizdW1X7j2bf8QS=z8mkw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> On May 9, 2015, at 6:54 PM, Luis Alberto Gonzalez Alvarez = <alberto.bsd@gmail.com> wrote: >=20 > =E2=80=8BHi everybody. >=20 > I=E2=80=8B'm building a base system for an arm platform, Which one? > based this guide > http://people.freebsd.org/~cognet/arm.html = <http://people.freebsd.org/~cognet/arm.html>; Those instructions are *very* out of date. There are much simpler approaches now. If you want to do it =E2=80=9Cthe hard way=E2=80=9D, the basic outline = is just: $ cd /usr/src $ make TARGET_ARCH=3Darmv6 TARGET=3Darm buildworld $ make TARGET_ARCH=3Darmv6 TARGET=3Darm buildkernel (TARGET_ARCH and TARGET here may vary depending on the particular board = you=E2=80=99re targeting.) To build a filesystem image suitable for booting, you=E2=80=99ll need to = install world onto it: $ make TARGET_ARCH=3Darmv6 TARGET=3Darm DESTDIR=3Dmy_base_dir = installworld Then you need to figure out what to do with the kernel and what boot = bits are needed by your particular board. This varies a lot from system = to system. If you don=E2=80=99t want to do it the hard way: FreeBSD=E2=80=99s release engineers are publishing stock images for several popular boards that you can just download and run. The Crochet tool knows how to build complete, customized bootable images for a variety of boards. Cheers, Tim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FB557317-8B5D-491D-AA26-890381CBEAE6>