Date: Thu, 13 Jun 2002 10:47:53 -0400 From: Don Bowman <don@sandvine.com> To: "'freebsd-stable@freebsd.org'" <freebsd-stable@freebsd.org> Subject: dual processor XEON shows Message-ID: <FE045D4D9F7AED4CBFF1B3B813C8533767644D@mail.sandvine.com>
next in thread | raw e-mail | index | archive | help
I have a Supermicro dual xeon 2GHz motherboard. I find that when I run top, I have processes running on CPU0...3. When I run dmesg, I find it lists 4 CPU's. Has anyone else run into anything like this? I also don't find this machine overly stable, it sometimes just stops working. Also, the CPU speed shows as ~800MHz here, but its supposed to be 2GHz. Any suggestions on where that comes from or how its measured? Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (798.64-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> real memory = 1073217536 (1048064K bytes) avail memory = 1039548416 (1015184K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu2 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 Preloaded elf kernel "kernel" at 0xc040c000. netsmb_dev: loaded md0: Malloc disk Using $PIR table, 24 entries at 0xc00fde40 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #0 intpin 16 -> irq 2 IOAPIC #0 intpin 19 -> irq 10 IOAPIC #0 intpin 18 -> irq 11 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 IOAPIC #2 intpin 0 -> irq 16 pci2: <PCI bus> on pcib2 bge0: <Broadcom BCM5700 Gigabit Ethernet> mem 0xfc200000-0xfc20ffff irq 16 at device 1.0 on pci2 bge0: Ethernet address: 00:10:18:01:06:84 miibus0: <MII bus> on bge0 brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 IOAPIC #1 intpin 4 -> irq 17 IOAPIC #1 intpin 5 -> irq 18 IOAPIC #1 intpin 7 -> irq 19 pci3: <PCI bus> on pcib3 ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2000-0x20ff mem 0xfc340000-0xfc340fff irq 17 at device 2.0 on pci3 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xfc341000-0xfc341fff irq 18 at device 2.1 on pci3 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pci3: <unknown card> (vendor=0x8086, dev=0x100d) at 4.0 irq 19 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1400-0x141f irq 2 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1420-0x143f irq 10 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1440-0x145f irq 11 at device 29.2 on pci0 uhci2: (New UHCI DeviceId=0x24878086) usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 IOAPIC #0 intpin 17 -> irq 20 pci4: <PCI bus> on pcib4 pci4: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3400-0x343f mem 0xfc420000-0xfc43ffff,0xfc401000-0xfc401fff irq 20 at device 2.0 on pci4 fxp0: Ethernet address 00:30:48:12:36:07 inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1460-0x146f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xce800-0xcffff,0xd0000-0xd0fff,0xd8000-0xdb fff,0xdc000-0xdffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled BRIDGE 020214 loaded DUMMYNET initialized (011031) SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4 Waiting 2 seconds for SCSI devices to settle SMP: AP CPU #3 Launched! pass2 at ahc0 bus 0 target 6 lun 0 pass2: <SUPER GEM318 0> Fixed Processor SCSI-2 device pass2: 3.300MB/s transfers da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST318452LC 0004> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST318452LC 0004> Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FE045D4D9F7AED4CBFF1B3B813C8533767644D>