Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 9 Oct 2001 08:48:59 +0300
From:      "Andrey Deryugin" <aderyugin@stes.net>
To:        <stable@FreeBSD.org>
Subject:   Q. Every reboot "/ was not properly dismounted"
Message-ID:  <GCEALKMBHBPDNICGPNFIGEGICEAA.aderyugin@stes.net>

next in thread | raw e-mail | index | archive | help
Hi, All!

I've installed FreeBSD 4.4 Release from CD end then standard cvsup, make
buildworld, make kernel, make installworld, mergemaster. It was 2 days ago.

Now, every time after rebooting the box with "shutdown -r now" I get subj.

When I created slices on HDD I use "-U" for newfs and toggle on softupdates
on all slices except swap.

What I'm did wrong ? And how can I fix it ?

"uname -a" ->
FreeBSD sps.stes.net 4.4-STABLE FreeBSD 4.4-STABLE #0: Sun Oct  7 12:16:57
EEST 2001     root@sps.stes.net:/usr/obj/usr/src/sys/i815  i386

"dmesg" ->

FreeBSD 4.4-STABLE #0: Sun Oct  7 12:16:57 EEST 2001
    root@sps.stes.net:/usr/obj/usr/src/sys/i815
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (735.00-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3

Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  = 133169152 (130048K bytes)
avail memory = 126476288 (123512K bytes)
Preloaded elf kernel "kernel" at 0xc02fa000.
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00fdec0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 11
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem
0xd3000000-0xd30fffff,0xd3201000-0xd3201fff irq 12 at device 2.0 on pci1
fxp0: Ethernet address 00:d0:b7:af:87:88
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem
0xd3100000-0xd31fffff,0xd3200000-0xd3200fff irq 11 at device 5.0 on pci1
fxp1: Ethernet address 00:d0:b7:af:9a:ea
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f
irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd400-0xd41f
irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 5
orm0: <Option ROMs> at iomem
0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = enabled
ad0: 9768MB <ST310212A> [19846/16/63] at ata0-master UDMA66
acd0: CDROM <CD-ROM Drive/F5B> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted

Thanks.

Best regards
________________________________________________________________________
Andrey Deryugin      Senior IT Manager     Smart Traveller eServices Ltd.
aderyugin@stes.net   Tel. +357 2 511155    Fax.+357 2 513353


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?GCEALKMBHBPDNICGPNFIGEGICEAA.aderyugin>