Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 7 Dec 2001 19:43:41 -0500
From:      "Joe & Fhe Barbish" <barbish@a1poweruser.com>
To:        "FBSD Questions" <questions@FreeBSD.ORG>
Subject:   IP addressing problem maybe?
Message-ID:  <LPBBIGIAAKKEOEJOLEGOGEOACIAA.barbish@a1poweruser.com>

next in thread | raw e-mail | index | archive | help
Can not ping from Win98 box through FBSD to internet.

Nic card is not attached to LAN.
Tun0 is user ppp dial out to Isp.
Tun1 is user ppp dial in from win98 box.
Ifconfig shows status of connection after
user ppp modem dial out to ISP and Win98 box
Modem Dial in to FBSD box.
Who command shows barbish logged in from win98 box.
PING 63.162.62.2 from FBSD to internet is working.
PING 10.0.0.24   from FBSD to win98 box is not working.
FBSD ps ax command shows what is running at time of test.
netstat -I command shows routing at time of test.
Win98 can Ping 10.0.0.1  FBSD box, but can not
Ping 63.162.62.1 internet through FBSD box.
Have tried -nat on ppp direct command that starts dialin,
And enable proxy and enable proxyall, with no change in
Test results.


Does anybody have any ideas on what is wrong or what other
Commands I can issue to get more info?  Need help big time.

Thanks   Joe


# ifconfig -a
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet 127.0.0.1 netmask 0xff000000
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1514
	inet6 fe80::d41d:8cd9:8f00:b204%tun0 prefixlen 64 scopeid 0x3
	inet 63.70.155.36 --> 208.206.15.4 netmask 0xffffff00
	Opened by PID 198
tun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
	inet6 fe80::d41d:8cd9:8f00:b204%tun1 prefixlen 64 scopeid 0x4
	inet 10.0.0.1 --> 10.0.0.24 netmask 0xffffffff
	Opened by PID 178


# who
root             ttyv0   Dec  7 18:11
barbish          ttyd1   Dec  7 18:18

# ping -c 2 63,162.62.2
PING 63.162.62.2 (63.162.62.2): 56 data bytes
64 bytes from 63.162.62.2: icmp_seq=0 ttl=115 time=400.472 ms
64 bytes from 63.162.62.2: icmp_seq=1 ttl=115 time=410.043 ms
--- 63.162.62.2 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/stddev = 400.472/405.257/410.043/4.785 ms

# ping  -c 5  10.0.0.24
PING 10.0.0.24 (10.0.0.24): 56 data bytes
--- 10.0.0.24 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss


# ps  ax
  PID  TT  STAT      TIME COMMAND
    0  ??  DLs    0:00.00  (swapper)
    1  ??  ILs    0:00.02 /sbin/init --
    2  ??  DL     0:00.00  (pagedaemon)
    3  ??  DL     0:00.00  (vmdaemon)
    4  ??  DL     0:00.01  (bufdaemon)
    5  ??  DL     0:00.05  (syncer)
   28  ??  Is     0:00.00 adjkerntz -i
  112  ??  Ss     0:00.11 /usr/sbin/syslogd -s
  133  ??  Is     0:00.00 /usr/sbin/inetd -wW
  135  ??  Is     0:00.02 /usr/sbin/cron
  138  ??  Is     0:00.72 /usr/sbin/sshd
  141  ??  Ss     0:00.07 sendmail: accepting connections (sendmail)
  161  ??  Is     0:00.00 moused -p /dev/psm0 -t auto
  198  ??  Ss     0:00.22 ppp -background dialisp
  207  p0  Ss     0:00.05 /bin/csh -i
  217  p0  R+     0:00.00 ps ax
  170  v0  Is     0:00.04 login -p root
  194  v0  I      0:00.06 -csh (csh)
  206  v0  S+     0:00.02 script -k /custom/rootlog
  171  v1  Is+    0:00.01 /usr/libexec/getty Pc ttyv1
  172  v2  Is+    0:00.01 /usr/libexec/getty Pc ttyv2
  173  v3  Is+    0:00.01 /usr/libexec/getty Pc ttyv3
  174  v4  Is+    0:00.01 /usr/libexec/getty Pc ttyv4
  175  v5  Is+    0:00.01 /usr/libexec/getty Pc ttyv5
  176  v6  Is+    0:00.01 /usr/libexec/getty Pc ttyv6
  177  v7  Is+    0:00.02 /usr/libexec/getty Pc ttyv7
  178  d1  Ss+    0:00.13 /usr/sbin/ppp -direct incoming





# netstat  -i
Name  Mtu   Network       Address            Ipkts Ierrs    Opkts Oerrs
Coll
lp0*  1500  <Link#1>                             0     0        0     0
0
lo0   16384 <Link#2>                             0     0        0     0
0
lo0   16384 localhost   ::1                      0     -
   0     -     -
lo0   16384 fe80:2::1   fe80:2::1                0     -
   0     -     -
lo0   16384 127           localhost              0     -
   0     -     -
tun0  1514  <Link#3>                            67     0       68     0
0
tun0  1514  fe80:3::d41 fe80:3::d41d:8cd9        0     -
   0     -     -
tun0  1514  63.70.155/24  cle-dialup-26.m       67     -
  67     -     -
tun1  1500  <Link#4>                             4     0        6     0
0
tun1  1500  fe80:4::d41 fe80:4::d41d:8cd9        0     -
   0     -     -
tun1  1500  10.0.0.1/32   10.0.0.1               0     -
   5     -     -
#

ppp.conf
#################################################################
# PPP Configuration File for dial out extermial modem to ISP
# and Dial in external modem for connection to this FBSD system
# Written by Joe Barbish 11/15/2001
#
#################################################################

default:
 set log Phase Chat LCP IPCP CCP tun command
 ident user-ppp VERSION (built COMPILATIONDATE)

 # Ensure that "device" references the correct serial port
 # for your modem. (cuaa0 = COM1, cuaa1 = COM2)
 # This is for dial out to some other system

 set device /dev/cuaa0

 set speed 19200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
           \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
 set timeout 0				# no idle time out
 enable dns				# request DNS info (for resolv.conf)
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0


dialisp:
 # This label is used in the ppp -background dialisp  startup command
 # for papchap auto logon to standard ISP provider
 #
 set phone 14434340045
 set authname barbish
 set authkey 222222

 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0  #get dymanic IP
ADDR
 add default HISADDR			# Add a (sticky) default route


incoming:
 # Configuration for dial in modem access to this FBSD system.
 # This label is used in  ppp -direct incoming    command
 # which is buried in script /usr/local/bin/ppplogin that starts
 # the whole process of accepting the incomming call.
 # CHAP uses /etc/ppp/ppp.secret file for logging in id & pw.
 # A unique IP address is assigned to the ttyd activated in the
 # /etc/ttys/ file. 10.0.0.24
 # This FBSD box 10.0.0.1

 set ifaddr 10.0.0.1 10.0.0.24 255.255.255.255
 allow users barbish
 enable chap
 accept dns




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LPBBIGIAAKKEOEJOLEGOGEOACIAA.barbish>