Date: Mon, 21 Jul 2003 15:01:24 -0600 From: "Stephane Raimbault" <segr@hotmail.com> To: <current@freebsd.org> Subject: FreeBSD 5.1-R kernel panic Message-ID: <Law10-OE203riCTVuy100012a52@hotmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0005_01C34F98.F41BC5F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
I'm running FreeBSD 5.1-RELEASE with the SMP kernel and ran across the
following kernel panic.
panic: kmem_malloc(4096): kmem_map too small: 275251200 total allocated
I'm trying to figure out what could be causing this, what kind of
information that I could provide to this group (or other group?) to see if
this is a bug in FreeBSD that needs to be looked into?
The box is basically a busy apache server... the kernel panic seemed to
occur during the periodic daily was running. It seems to complete the
440.status-mailq part of periodic daily , but doesn't do
450.status-security.
This isn't the first time the box has crashed at aprox. 3:01 am (when daily
runs)... however this is the first time I've seend the kernel panic message
quoted above in the /var/run/dmesg.boot file.
I have attached the entire /var/run/dmesg.boot file to this message.
What can I do to assist in identifiying and resolving this problem?
Thanks,
Stephane Raimbault.
------=_NextPart_000_0005_01C34F98.F41BC5F0
Content-Type: text/plain;
name="dmesg-boot.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg-boot.txt"
%cat /var/run/dmesg.boot
76.232.138 in via em0
panic: kmem_malloc(4096): kmem_map too small: 275251200 total allocated
cpuid =3D 0; lapic.id =3D 00000000
boot() called on cpu#0
syncing disks, buffers remaining... 7154 7154 7153 7153 7153 7153 7154 =
7152 7152 7152 7152 7152 7152 7152 7152 7152 7152 7152 7152 7152 7152 =
7152 7152 7152 7152 7152 7152
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 5.1-RELEASE #0: Fri Jun 20 18:36:54 MDT 2003
root@srv2.ashleymadison.com:/usr/obj/usr/src/sys/SRV2
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ef000.
Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc06ef2e4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06ef390.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2399328676 Hz
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7
=
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory =3D 4160225280 (3967 MB)
avail memory =3D 4045828096 (3858 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
Programming 24 pins in IOAPIC #2
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000
io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 24 entries at 0xc00fde40
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 16 -> irq 2
IOAPIC #0 intpin 19 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - =
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver =
attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
IOAPIC #2 intpin 6 -> irq 16
IOAPIC #2 intpin 7 -> irq 17
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port =
0x3000-0x303f mem 0xf8200000-0xf821ffff irq 16 at device 3.0 on pci2
em0: Speed:100 Mbps Duplex:Half
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port =
0x3040-0x307f mem 0xf8220000-0xf823ffff irq 17 at device 3.1 on pci2
em1: Speed:1000 Mbps Duplex:Full
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver =
attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
IOAPIC #1 intpin 6 -> irq 18
asr0: <Adaptec Caching SCSI RAID> mem =
0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf83fffff irq 18 =
at device 3.0 on pci3
asr0: major=3D154
asr0: ADAPTEC 2015S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port =
0x2000-0x201f irq 2 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port =
0x2020-0x203f irq 10 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port =
0x2040-0x205f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port =
0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem =
0xf8000000-0xf80003ff irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port =
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROMs> at iomem =
0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0=
xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, =
default to deny, logging disabled
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
ses0 at asr0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-5 3B05> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 70092MB (143548416 512 byte sectors: 255H 63S/T 8935C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /data was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
%
------=_NextPart_000_0005_01C34F98.F41BC5F0--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Law10-OE203riCTVuy100012a52>