Date: Tue, 20 Jan 2004 10:01:53 -0500 From: "fbsd_user" <fbsd_user@a1poweruser.com> To: "Aeaenae Aieo?eaae?" <novad@newmail.ru>, <freebsd-questions@FreeBSD.ORG> Subject: RE: Problem with foppy drive Message-ID: <MIEPLLIBMLEEABPDBIEGEEEHFFAA.fbsd_user@a1poweruser.com> In-Reply-To: <852489629.20040120161615@newmail.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Friend I think I see your problem in the boot log. FBSD is having problems reading your PC's bios. Enter your PC bio's menu and disable all options dealing with power management. While you are there also disable any plug-n-play option and if there is an operating system option change that to 'other' or at least not ms/windows. http://www.freebsd.org/cgi/man.cgi?query=acpi&apropos=0&sektion=0&ma npath=FreeBSD+5.2-RELEASE+and+Ports&format=html acpi -- Advanced Configuration and Power Management support -----Original Message----- From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей Дмитриевич Sent: Tuesday, January 20, 2004 8:16 AM To: freebsd-questions@FreeBSD.ORG Subject: Problem with foppy drive Hello Друг( it means friend on russian) Now I'll try to answer your questions. I tested my floppy drive in the same way 1. Boot one Operating System 2. Write some data on the floppy disc (usually it is mp3-files or jpg-files) 3. Reboot my PC and boot another OS 4. Check data - everything good 5. Format disc and test again in the same way Also I read and wrote data on my discs on another PC during this term and didn't have problems Next question about hardware 1. Soltek mainboard SL-85DIR Socket 478 Mainboard Intel 845d series 2. nVidia G-force 4 MX 440 64MB DDR (AGP) 3. 512MB DDR RAM memory 4. Creative Sound Blaster Live!5.1 5. Winmodem ZyXEL Omni 56K PCI (i thinc FreeBSD know nothing about it) 6. Asus CD-ROM drive 50x IDE 7. Yamaha 3200 CD-RW drive 8. Intel Pentium 4 Processor Socket 478 9. HDD 40 Gb SEAGATE UDMA 7200 BARRACUDA 10. and this floppy drive I think that's all My PC is 1.5 years old. I bought in 24-July-2002 About scsi: There is no scsi in my computer so floppy drive is not scsi when I try : mount -t msdos /dev/fd0 /mnt my system displays : msdosfs : /dev/fd0: No sush file or directory I can say that there was no time whan this file existed so i cannot mount floppy Here is /var/run/dmesg.boot Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Fri Jan 16 18:39:42 MSK 2004 root@:/usr/src/sys/i386/compile/NovAD3a Preloaded elf kernel "/boot/kernel/kernel" at 0xc054a000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc054a26c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1817949908 Hz CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1817.95-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE, MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 536805376 (511 MB) avail memory = 515624960 (491 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT INTEL845> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00f78a0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc150ec60), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc150eba0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0._CRS] (Node 0xc150eba0), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.PCI0 - AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.MDET] (Node 0xc150ec60), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc4047960), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xc4047960), AE_AML_REGION_LIMIT can't fetch resources for \\_SB_.MEM_ - AE_AML_REGION_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcm0: <Creative EMU10K1> port 0xc800-0xc81f irq 12 at device 3.0 on pci2 pcm0: <SigmaTel STAC9708/11 AC97 Codec> pci2: <simple comms> at device 4.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xfc00-0xfc0f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xe800-0xe81f irq 12 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xec00-0xec1f irq 10 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: cmd 3 failed at out byte 1 of 3 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 5 on isa0 pcic_attach: attach found no sockets device_probe_and_attach: pcic0 attach returned 6 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100 acd0: CD-RW <YAMAHA CRW3200E> at ata1-master PIO4 acd1: CDROM <ASUS CD-S500/A> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s3a That's all. P.S. Thank you that you try to help me. Sunday, January 18, 2004, 7:28:54 PM, you wrote: f> Hello friend f> Post the /var/run/dmesg.boot file in your next email, so I can look f> for problems. f> Explain how you tested floppy drive using different operating f> systems. f> What hardware is in the PC? f> How old is the PC? f> Is it pre-Y2K? f> Is this an scsi floppy drive? f> Tell me what happens when you try this f> Login in as root user f> Put msdos formatted floppy disk in drive f> Issue this command f> mount -t msdos /dev/fd0 /mnt f> cd /mnt f> ls f> cd /root f> umount /mnt f> -----Original Message----- f> From: owner-freebsd-questions@freebsd.org f> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей f> Дмитриевич f> Sent: Sunday, January 18, 2004 10:10 AM f> To: freebsd-questions@FreeBSD.ORG f> Subject: Problem with foppy drive f> Hello , Support f> I used my floppy just now in Ms Windows XP and it works. f> Also i used it in ASPlinux 7.2 and Linux Mandrake 9.1 (russian) f> and it worked very good. f> So what should i do. if it is possible please write as detailly as f> possible because i know FreeBSD badly (i use it for about 3 weeks) f> This boot error message general means that your floppy drive is f> broken. f> When was the last time you used it? f> Try to verify that it's in working order by booting an MS/Window f> system on that PC, f> or swap that floppy drive with one from some other PC that you can f> test works first. f> -----Original Message----- f> From: owner-freebsd-questions@freebsd.org f> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Алексей f> Дмитриевич f> Sent: Sunday, January 18, 2004 8:28 AM f> To: freebsd-questions@FreeBSD.ORG f> Subject: FreeBSD support f> Hello Support, f> I have a problem my floppy drive does not want to work. f> when my FreeBSD 5.1 boots I have a message f> fdc0: cmd 3 faild at out byte 1 of 3 f> and f> cannot reserve I/O port range (6 port) f> After logining I cannot use my floppy drive- there is no device f> file. f> What should I do? f> -- f> Best regards, f> Alexey mailto:novad@newmail.ru f> _______________________________________________ f> freebsd-questions@freebsd.org mailing list f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f> To unsubscribe, send any mail to f> "freebsd-questions-unsubscribe@freebsd.org" f> __________ f> -- f> Best regards, f> Алексей mailto:novad@newmail.ru f> _______________________________________________ f> freebsd-questions@freebsd.org mailing list f> http://lists.freebsd.org/mailman/listinfo/freebsd-questions f> To unsubscribe, send any mail to f> "freebsd-questions-unsubscribe@freebsd.org" f> __________ f> www.zakaz.orc.ru - доставка карт связи: ОРЦ (IP-телефония, f> доступ в Интернет, хостинг), МТС, БИ Плюс -- Best regards, Алексей mailto:novad@newmail.ru _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MIEPLLIBMLEEABPDBIEGEEEHFFAA.fbsd_user>