Date: Tue, 19 Dec 2000 04:08:33 -0500 From: "Christian Kuhtz" <ck@gnu.org> To: <hackers@freebsd.org> Subject: ata weirdness Message-ID: <NEBBJKIJGLMGELMBGHEOMEMKCKAA.ck@gnu.org>
next in thread | raw e-mail | index | archive | help
Hey gang, for some reason, when I boot off the FreeBSD 4.2-RELEASE floppies or the CD-ROM, one of my drives isn't recognized. Here's what the system looks like: ASUS K7V, Athlon 850, 512MB on the on-board IDE controller.. 1st channel: Maxtor 54098U8 UDMA4 Kenwood CD-R UDMA2 2nd channel Maxtor 54098U8 UDMA4 HP CD Writer 9300 UDMA2 Under winblows everything's recognized properly and everything's working perfectly. Win98 is install on the drive on the 1st channel, FreeBSD on the drive on the 2nd channel. When I boot FreeBSD, at the point where the ATA code attempts to recognize the drives (it properly identifies the controllers prior to this), I get the following message: <snip> ata0-master: ata_command: timeout waiting for intr ata0-master: ata_command: identify failed ad2: 39082MB <Maxtor 54098U8> [79406/16/63] at ata1-master UDMA66 <snip> Anyone have any idea as to what's going on here? ad0 is never recognized properly. This happened when I booted off floppy and installed from CD-ROM. If there's something I can do to generate more debug info, I'd be happy to. I have attached the full dmesg at the bottom of this email. Thanks in advance.. Cheers, Chris -- Christian Kuhtz <ck@arch.bellsouth.net> -wk, <ck@gnu.org> -hm Sr. Architect, Engineering & Architecture, BellSouth.net, Atlanta, GA, U.S. "I speak for myself only." Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000 jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (850.03-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x621 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA T,PSE36,MMX,FXSR> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 536788992 (524208K bytes) avail memory = 518406144 (506256K bytes) Preloaded elf kernel "kernel" at 0xc0436000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2 uhub1: 4 ports with 4 removable, self powered ugen0: Eastman Kodak Corp. product 0x0002, rev 1.00/0.90, addr 3 ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. uhid0: Microsoft SideWinder Force Feedback 2 Joystick, rev 1.10/a.00, addr 5, iclass 3/0 uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <unknown card> (vendor=0x1102, dev=0x0002) at 10.0 pci0: <unknown card> (vendor=0x1102, dev=0x7002) at 10.1 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9800-0x987f mem 0xd5800000-0xd580007f irq 10 at device 11.0 on pci0 xl0: Ethernet address: 00:01:02:37:82:fd miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: cannot reserve I/O port range ata0-master: ata_command: timeout waiting for intr ata0-master: identify failed ad2: 39082MB <Maxtor 54098U8> [79406/16/63] at ata1-master UDMA66 acd0: CDROM <KENWOOD CD-ROM UCR-421 V212G> at ata0-slave using PIO4 acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9300> at ata1-slave using PIO4 Mounting root from ufs:/dev/ad2s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NEBBJKIJGLMGELMBGHEOMEMKCKAA.ck>