Date: Tue, 31 Oct 1995 14:20:00 -0800 (PST) From: -Vince- <vince@apollo.COSC.GOV> To: hackers@FreeBSD.ORG Subject: machine reboot & kernel maxusers option Message-ID: <Pine.BSF.3.91.951031141919.944S-100000@apollo.COSC.GOV>
next in thread | raw e-mail | index | archive | help
Hi everyone,
I am experiencing the following problem and the machine just
reboots under FreeBSD-current, anyone have any ideas?
MAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
5 5 5 5 5 5 5 5 5 5 5 5 5 assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
assertion "cp" failed: file "../../pci/ncr.c", line 5560
sd0(ncr0:0:0): COMMAND FAILED (4 28) @f0b4aa00.
5 5 5 5 5 5 5 giving up
Automatic reboot in 15 seconds\^?\^A a key on the console to abort
Rebooting...
I am running several mailing lists with majordomo and I
understand that the kernel complains that there is too many files opened
when my limit is set to 1024 per user since here is the output of limit:
cputime unlimited
filesize unlimited
datasize 65536 kbytes
stacksize 8192 kbytes
coredumpsize unlimited
memoryuse 19472 kbytes
descriptors 1024
memorylocked 6492 kbytes
maxproc 1024
sysctl -a output:
kern.ostype = FreeBSD
kern.osrelease = 2.2-CURRENT
kern.osrevision = 199306
kern.version = FreeBSD 2.2-CURRENT #0: Fri Oct 27 19:57:05 PDT 1995
vince@apollo.COSC.GOV:/usr/src/sys/compile/ASTRO
kern.maxvnodes = 2726
kern.maxproc = 1620
kern.maxfiles = 3240
kern.argmax = 65536
kern.securelevel = -1
kern.hostname = apollo.COSC.GOV
kern.hostid = 0
kern.clockrate: hz = 100, tick = 10000, profhz = 1024, stathz = 128
kern.posix1version = 198808
kern.ngroups = 16
kern.job_control = 1
kern.saved_ids = 1
kern.boottime = Tue Oct 31 11:47:07 1995
kern.domainname = COSC.GOV
kern.update = 30
kern.osreldate = 199508
kern.bootfile = /kernel
kern.maxfilesperproc = 3240
kern.maxprocperuid = 1619
kern.dumpdev = disabled
vm.loadavg: 0.00 0.03 0.01
net.inet.ip.forwarding = 1
net.inet.ip.redirect = 1
net.inet.ip.ttl = 64
net.inet.ip.rtexpire = 210
net.inet.ip.rtminexpire = 10
net.inet.ip.rtmaxcache = 128
net.inet.ip.sourceroute = 0
net.inet.ip.directed-broadcast = 0
net.inet.icmp.maskrepl = 0
net.inet.tcp.rfc1323 = 0
net.inet.tcp.rfc1644 = 0
net.inet.tcp.mssdflt = 512
net.inet.tcp.rttdflt = 3
net.inet.tcp.keepidle = 14400
net.inet.tcp.keepintvl = 150
net.inet.tcp.sendspace = 16384
net.inet.tcp.recvspace = 16384
net.inet.udp.checksum = 1
net.inet.udp.maxdgram = 9216
net.inet.udp.recvspace = 41600
hw.machine = i386
hw.model = Pentium 735\90
hw.ncpu = 1
hw.byteorder = 1234
hw.physmem = 21250048
hw.usermem = 17403904
hw.pagesize = 4096
hw.floatingpoint = 1
machdep.console_device = ??
machdep.adjkerntz = 28800
machdep.disable_rtc_set = 0
user.cs_path = /usr/bin:/bin:/usr/sbin:/sbin:
user.bc_base_max = 99
user.bc_dim_max = 2048
user.bc_scale_max = 99
user.bc_string_max = 1000
user.coll_weights_max = 0
user.expr_nest_max = 32
user.line_max = 2048
user.re_dup_max = 255
user.posix2_version = 199212
user.posix2_c_bind = 0
user.posix2_c_dev = 0
user.posix2_char_term = 0
user.posix2_fort_dev = 0
user.posix2_fort_run = 0
user.posix2_localedef = 0
user.posix2_sw_dev = 0
user.posix2_upe = 0
user.stream_max = 20
user.tzname_max = 255
dmesg produces the following:
FreeBSD 2.2-CURRENT #0: Fri Oct 27 19:57:05 PDT 1995
vince@apollo.COSC.GOV:/usr/src/sys/compile/ASTRO
CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 25165824 (24576K bytes)
avail memory = 20107264 (19636K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x260-0x27f irq 5 on isa
ed0: address 00:40:05:16:77:85, type NE2000 (16 bit)
ed1 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
ahc1 not found
ahb0 not found
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0: timeout getting status
mcd0 not found at 0x300
mcd1: timeout getting status
mcd1 not found at 0x340
matcdc0 not found at 0xffffffff
scd0 not found at 0x230
ie0 not found at 0x360
ep0 not found at 0x300
ix0 not found at 0x300
le0: no board found at 0x300
le0 not found at 0x300
lnc0 not found at 0x280
lnc1 not found at 0x300
ze0 not found at 0x300
zp0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
gus0 at 0x220 irq 11 drq 1 on isa
gus0: <Gravis UltraSound 2.4 (1024k)>
Probing for devices on the PCI bus:
chip0 <Intel 82437 (Triton)> rev 2 on pci0:0
chip1 <Intel 82371 (Triton)> rev 2 on pci0:7
ncr0 <ncr 53c810 scsi> rev 2 int a irq 10 on pci0:11
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "DEC DSP5400S 427L" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
3814MB (7812870 512 byte sectors)
vga0 <Display device> rev 0 on pci0:12
changing root device to sd0a
in_rtqtimo: adjusted rtq_reallyold to 2400
uid 10 on /: file system full
in_rtqtimo: adjusted rtq_reallyold to 1600
in_rtqtimo: adjusted rtq_reallyold to 1066
in_rtqtimo: adjusted rtq_reallyold to 710
in_rtqtimo: adjusted rtq_reallyold to 473
in_rtqtimo: adjusted rtq_reallyold to 315
in_rtqtimo: adjusted rtq_reallyold to 210
Here is the kernel configuration:
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46 1995/06/11 19:31:11 rgrimes Exp $
# 1995/10/25 14:53:33 vince ASTRO
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
ident ASTRO
maxusers 100
#options MATH_EMULATE #Support for x87 emulation
options "CHILD_MAX=1024"
options "OPEN_MAX=1024"
options SYSVSHM
options SYSVSEM
options SYSVMSG
options GATEWAY
options MROUTING
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
config kernel root on wd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
controller ncr0
controller ahc0
controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller ahc1 at isa? bio irq ? vector ahcintr
controller ahb0 at isa? bio irq ? vector ahbintr
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
device st0
device cd0 #Only need one of these, the code dynamically grows
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
controller matcd0 at isa? port ? bio
device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
#options XSERVER # include code for XFree86
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device lpt1 at isa? port? tty
device lpt2 at isa? port? tty
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device ed0 at isa? port 0x260 net irq 5 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device fddi
pseudo-device log
pseudo-device sl 256
# ijppp uses tun instead of ppp device
pseudo-device ppp 256
pseudo-device tun 256
pseudo-device pty 256
pseudo-device gzip # Exec gzipped a.out's
pseudo-device speaker
pseudo-device snp 10
# Controls all sound devices
controller snd0
device gus0 at isa? port 0x220 irq 11 drq 1 vector gusintr
device pca0 at isa? port IO_TIMER1 tty
# Options for `wdc':
#
# ATAPI enables the support for ATAPI-compatible IDE devices
#
options ATAPI #Enable ATAPI support for IDE bus
# IDE CD-ROM driver - requires wdc controller and ATAPI option
device wcd0
Also, another thing is we have 24 megs of physical memory and 240
megs of swap space. The machine sometimes just locks up instead of
rebooting... Any help would be appreciated.
Cheers,
-Vince- vince@COSC.GOV - GUS Mailing Lists Admin
UC Berkeley AstroPhysics - Electrical Engineering (Honorary B.S.)
Chabot Observatory & Science Center - Board of Advisors
Running FreeBSD - Real UN*X for Free!
Linda Wong/Vivian Chow/Hacken Lee/Danny Chan Fan Club Mailiing Lists Admin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.951031141919.944S-100000>