Date: Sun, 10 Nov 1996 10:56:48 +0100 (MET) From: Andreas Klemm <andreas@klemm.gtn.com> To: "Justin T. Gibbs" <gibbs@freefall.freebsd.org> Cc: "Alexsandro D. F. Correia" <acorreia@marlin.com.br>, hackers@FreeBSD.ORG Subject: Re: Problems restoring Backups !!! Message-ID: <Pine.BSF.3.95.961110105121.818A-100000@klemm.gtn.com> In-Reply-To: <199611091736.JAA10651@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 9 Nov 1996, Justin T. Gibbs wrote: > >One problem in -current still remains. If I enable Tagged command > >queueing and try to do a backup. the machine hangs. > >P100, ASUS P55tp4xe, 256k burst, 2940, TDC 4222. I noticed that > >also using a Sun DAT. > > I need a boot -v. I'm also assuming that you have all of my changes up > to and including those made on the 7th? Hi Justin, thanks that you take the time on that. BTW, I just wrote a problem report. I'm not sure if I had a kernel with your changes from Nov. 7th. But I'm just cvsupping and will repeat that with a new kernel. S delay: 2 clocks chip1 <Intel 82371FB PCI-ISA bridge> rev 2 on pci0:7:0 I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks Extended BIOS: disabled Lower BIOS: enabled Coprocessor IRQ13: enabled Mouse IRQ12: disabled Interrupt Routing: A: IRQ11, B: disabled, C: IRQ12, D: disabled MB0: disabled, MB1: disabled chip2 <Intel 82371FB IDE interface> rev 2 on pci0:7:1 mapreg[20] type=1 addr=0000e800 size=0010. Primary IDE: disabled Secondary IDE: disabled vga0 <VGA-compatible display device> rev 0 int a irq 12 on pci0:10 mapreg[10] type=0 addr=f8000000 size=2000000. ahc0 <Adaptec 2940 SCSI host adapter> rev 3 int a irq 11 on pci0:12 mapreg[10] type=1 addr=0000e400 size=0100. mapreg[14] type=0 addr=f7800000 size=1000. reg16: ioaddr=0xe400 size=0x100 reg20: virtual=0xf5fbf000 physical=0xf7800000 size=0x1000 ahc0: Reading SEEPROM...done. ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs ahc0: Reseting Channel A ahc0: Downloading Sequencer Program...Done ahc0: Probing channel A Choosing drivers for scbus configured at 0 ahc0 waiting for scsi devices to settle ahc0: target 0 synchronous at 10.0MHz, offset = 0xf ahc0: target 0 Tagged Queuing Device (ahc0:0:0): "IBM DORS-32160 WA0A" type 0 fixed SCSI 2 sd is configured at 0 sd0(ahc0:0:0): Direct-Access 2063MB (4226725 512 byte sectors) sd0(ahc0:0:0): with 6703 cyls, 5 heads, and an average 126 sectors/track ahc0: target 1 synchronous at 10.0MHz, offset = 0xf ahc0: target 1 Tagged Queuing Device (ahc0:1:0): "IBM DORS-32160 WA0A" type 0 fixed SCSI 2 sd is configured at 1 sd1(ahc0:1:0): Direct-Access 2063MB (4226725 512 byte sectors) sd1(ahc0:1:0): with 6703 cyls, 5 heads, and an average 126 sectors/track ahc0: target 4 synchronous at 4.4MHz, offset = 0x8 (ahc0:4:0): "TANDBERG TDC 4222 =07:" type 1 removable SCSI 2 st is configured at 0 st0(ahc0:4:0): Sequential-Access density code 0x0, 512-byte blocks, write-enabled ahc0: target 6 synchronous at 4.0MHz, offset = 0xf (ahc0:6:0): "TOSHIBA CD-ROM XM-3601TA 0725" type 5 removable SCSI 2 cd is configured at 0 cd0(ahc0:6:0): CD-ROM cd present [253041 x 2048 byte records] pci0: uses 33558528 bytes of memory from f7800000 upto f9ffffff. pci0: uses 272 bytes of I/O space from e400 upto e80f. Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <4 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 maddr 0xcc000 msize 16384 on isa ed0: address 00:00:c0:25:fd:2d, type WD8013EPC (16 bit) bpf: ed0 attached sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in tel0 at 0xd80 irq 9 on isa bpf: ipi0 attached bpf: ipi1 attached bpf: ipi2 attached bpf: ipi3 attached tel0: card type Teles S0/16.3 npx0 on motherboard npx0: INT 16 interface joy0 at 0x201 on isa joy0: joystick sb0 at 0x220 irq 5 drq 1 on isa sb0: <SoundBlaster 16 4.5> sbxvi0 at 0x0 drq 5 on isa sbxvo0: <SoundBlaster 16 4.5> sbmidi0 at 0x330 on isa <SoundBlaster MPU-401> opl0 at 0x388 on isa opl0: <Yamaha OPL-3 FM> imasks: bio c0000840, tty c003009a, net c0020600 Device configuration finished. Considering FFS root f/s. configure() finished. bpf: tun0 attached bpf: lo0 attached IP packet filtering initialized, divert disabled, unlimited logging sd0s1: type 0x6, start 63, end = 1028159, size 1028097 : OK sd0s2: type 0x5, start 1028160, end = 2056319, size 1028160 : OK sd0s3: type 0xa5, start 2056320, end = 4225094, size 2168775 : OK sd0s5: type 0x6, start 1028223, end = 2056319, size 1028097 : OK sd1s1: type 0xa5, start 63, end = 4225094, size 4225032 : OK Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Queue Full Assigned: TEI = 0xa1 = 80 -- andreas@klemm.gtn.com /\/\___ Wiechers & Partner Datentechnik GmbH Andreas Klemm ___/\/\/ Support Unix -- andreas.klemm@wup.de pgp p-key http://www-swiss.ai.mit.edu/~bal/pks-toplev.html >>> powered by <<< ftp://sunsite.unc.edu/pub/Linux/system/Printing/aps-491.tgz >>> FreeBSD <<<
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95.961110105121.818A-100000>