Date: Mon, 14 Aug 2000 13:36:00 -0400 (EDT) From: Antonio Bemfica <antonio@axolotl.ic.gc.ca> To: freebsd-stable@FreeBSD.ORG Subject: /stand/sysinstall cannot find any disks ? Message-ID: <Pine.BSF.3.96.1000814132938.410A-100000@axolotl.ic.gc.ca>
next in thread | raw e-mail | index | archive | help
Hello I'm trying to add a new disk to my system via /stand/sysinstall, but as soon as I get started the following message pops us" "No disks found! ..." I have only SCSI disks in this server and am running 4.1-stable. Below are the applicable portions from dmesg. The new disk is da1. Any help would be most appreciated. Thanks Antonio ----------------------------------------------------------------------------- FreeBSD 4.1-STABLE #5: Mon Aug 14 12:35:57 EDT 2000 [...] ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xe1000000-0xe1000fff irq 10 at device 6.0 on pci0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: <Adaptec 2940 Ultra2 SCSI adapter> port 0xb800-0xb8ff mem 0xe0800000-0xe0800fff irq 10 at device 9.0 on pci0 ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs [...] da3 at ahc0 bus 0 target 5 lun 0 da3: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device da3: 3.300MB/s transfers da3: 96MB (196608 512 byte sectors: 64H 32S/T 96C) da0 at ahc1 bus 0 target 0 lun 0 da0: <QUANTUM VIKING II 4.5WLS 5520> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C) da2 at ahc1 bus 0 target 3 lun 0 da2: <SEAGATE ST39173W 6244> Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) Mounting root from ufs:/dev/da0s1a da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST118273W 6244> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.1000814132938.410A-100000>