Date: Thu, 20 Nov 1997 23:05:57 -0800 (PST) From: "Jamil J. Weatherbee" <jamil@trojanhorse.ml.org> To: hackers@freebsd.org Subject: SCSI Errors & CCD Message-ID: <Pine.BSF.3.96.971120225634.968C-100000@trojanhorse.ml.org>
next in thread | raw e-mail | index | archive | help
I purchased two 4.3 gig IBM External Scsi drives and want to use ccd to
make them mirrors of each other. I would like to install from my 2.2.5
cds onto these drives. Is there a way to set it up to install onto
mirrored drives at install time or can I do this later?
I want to be able to boot off of these ccd drives.
What does the following mean:
It appeared when I was trying to install 2.2.5 on my external IBM 4.3gig
Ultra SCSI. I am using a 2940 ultra, and are properly active terminated
externally. The adapter is set to use ultra mode(20mhz?) on this device
which is id0. This is the only device external, and the only device
period (3' cable).
sd0(ahc0:0:0): parity error during data-in phase
sd0(ahc0:0:0): ABORTED COMMAND
sd0(ahc0:0:0): Initiator Detected error message received, retries: 2
sometimes retries were 1-4
here is my dmesg:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.5-STABLE #0: Thu Nov 20 20:52:17 PST 1997
root@shellx.acroal.com:/usr/src/sys/compile/SHELLX
CPU: Pentium Pro (179.63-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x617 Stepping=7
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 62496768 (61032K bytes)
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
vga0 <VGA-compatible display device> rev 2 int a irq 11 on pci0:15
ahc0 <Adaptec 2940A Ultra SCSI host adapter> rev 1 int a irq 9 on pci0:16
ahc0: aic7860 Single Channel, SCSI Id=7, 3 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "IBM DCAS-34330 S60B" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 4134MB (8467200 512 byte sectors)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 00:40:05:3c:8e:0f, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC22100H>
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <WDC AC34000L>
wd2: 3815MB (7814016 sectors), 7752 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (atapi): </>, removable, dma, iordis
wcd0: 689Kb/sec, 112Kb cache, audio play, 127 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster 16 4.13>
sbxvi0 at 0x0 drq 5 on isa
sbxvi0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
<SoundBlaster MPU-401>
DEVFS: ready to run
IP packet filtering initialized, divert enabled, logging disabled
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971120225634.968C-100000>