Date: Sat, 28 Feb 1998 13:29:35 -0500 (EST) From: Glen W Mann <gmann@itw.com> To: freebsd-questions@FreeBSD.ORG Subject: New Pentium - sio0 (and mouse) not found Message-ID: <Pine.BSF.3.96.980228005018.419B-100000@myname.my.domain>
next in thread | raw e-mail | index | archive | help
Howdy-
I bought a new Pentium because my 486 died. Awwwwww. :(
FreeBSD cannot find sio0 where (I guess) the mouse should be (dmesg
below), and thus X cannot find a mouse. I also tried the psm0 and mse0
devices with no success. NT 4.0 uses the mouse fine (it calls it a
Logitech Serial Mouse) but getting information from NT (like WHERE IS
IT?) is impossible. COM2 shows up in the NT control panel but COM1 does
not, so FreeBSD and NT agree the port is gone.
I've got a SiS 5597/5598 chipset, and a modem which works (on sio1). BIOS
setup changes setup did not help, nor did looking through i386/conf/LINT.
XF86Setup goes in to VGA mode but no mouse. Any ideas what can I do?
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.5-RELEASE #0: Tue Oct 21 14:33:00 GMT 1997
jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC
CPU: Pentium (167.05-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 29360128 (28672K bytes)
avail memory = 26275840 (25660K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=1039 device=5597 subclass=0)> rev 2 on pci0:0
chip1 <SiS 85c503> rev 1 on pci0:1:0
pci0:1:1: Silicon Integrated Systems, device=0x5513, class=storage (ide) int a irq ?? [no driver assigned]
vga0 <VGA-compatible display device> rev 101 int a irq 11 on pci0:20
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 not found at 0x3f8
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG WU32543A (2.54GB)>
wd0: 2423MB (4963392 sectors), 4924 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <M1614TA>
wd1: 1040MB (2130912 sectors), 2114 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <QUANTUM TRB850A>
wd2: 810MB (1660176 sectors), 1647 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (atapi): <UTI V4.6a/V4.6a>, removable, dma, iordis
atapi1.1: unknown phase
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
Thanks
-Glen Mann
gmann@itw.com, despite what the mail header might say...
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980228005018.419B-100000>