Date: Thu, 4 Mar 1999 05:41:02 +0000 (GMT) From: Brian Feldman <green@zone.syracuse.net> To: current@freebsd.org Subject: ATA not quite peachy Message-ID: <Pine.BSF.4.05.9903040533530.28250-100000@zone.syracuse.net>
next in thread | raw e-mail | index | archive | help
After testing out the new ATA drivers, I've only got a single problem. My
box locked up while accessing the LS-120 (and, seemingly, swapping):
Mar 4 00:20:02 green /kernel: atapi_transfer: bad command phase
Mar 4 00:20:33 green /kernel: swap_pager: indefinite wait buffer: device:
0x20019, blkno: 2800, size: 8192
I think what was going on was a second read transfer was trying to occur
while one was already going, and something wrong happened with the code or
bus, with the drive light staying on, so the swapper timed out trying to
access the hdd.
Hope someone can help with this; for now I'm using the old wd/wfd/acd.
The current system:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #65: Wed Mar 3 19:31:00 EST 1999
green@green.dyn.ez-ip.net:/usr/src/sys/compile/FELDMAN
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping=12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 62337024 (60876K bytes)
Bad DMI table checksum!
Preloaded elf kernel "kernel" at 0xf02b2000.
Probing for devices on PCI bus 0:
chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0
chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0
ohci0: <AcerLabs M5237 (Aladdin-V) USB Host Controller> rev 0x03 int a irq
10 on
pci0.2.0
usb0: OHCI version 1.0, legacy support
alpm0: <AcerLabs M15x3 Power Management Unit> rev 0x00 on pci0.3.0
chip2: <AcerLabs M1533 portable PCI-I-ISA bridge> rev 0xb4 on pci0.7.0
ata-pci0: <Acer Aladdin IV/V IDE controller> rev 0x20 int a irq 0 on
pci0.15.0
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 0 on
pci0.18.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
ppc0 at 0x378 irq 7 drq 3 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
lppps0: <Pulse per second Timing Interface> on ppbus 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.13>
sbxvi0 at drq 6 on isa
snd0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM>
joy0 at 0x201 on isa
joy0: joystick
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
usb0: <AcerLabs M5237 (Aladdin-V) USB Host Controller>
uhub0 at usb0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
alsmb0: <Aladdin IV/V/Pro2 SMBus controller>
smbus0: <System Management Bus> on alsmb0
smb0: <SMBus general purpose I/O> on smbus0
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled,
default to accept, logging disabled
DUMMYNET initialized (980901) -- size dn_pkt 48
ad0: <Maxtor 71626 AP/QA3C1D20> ATA-? disk at ata0 as master
ad0: 1554MB (3184170 sectors), 3158 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 0 depth queue
ad3: <Maxtor 71626 AP/QA3C1D20> ATA-? disk at ata1 as slave
ad3: 1554MB (3184170 sectors), 3158 cyls, 16 heads, 63 S/T, 512 B/S
ad3: 16 secs/int, 0 depth queue
acd0: <NEC CD-ROM DRIVE:285/3.04> CDROM drive at ata0 as slave
acd0: drive speed 2067KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-DA
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
afd0: <LS-120 COSM 02 UHD Floppy/0271C09T> rewriteable drive at ata1 as
master
afd0: 120MB (246528 sectors), 963 cyls, 8 heads, 32 S/T, 512 B/S
afd0: Unknown media (0x0)
changing root device to ad0s1a
WARNING: / was not properly dismounted
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
Brian Feldman _ __ ___ ___ ___
green@unixhelp.org _ __ ___ | _ ) __| \
http://www.freebsd.org/ _ __ ___ ____ | _ \__ \ |) |
FreeBSD: The Power to Serve! _ __ ___ ____ _____ |___/___/___/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9903040533530.28250-100000>