Date: Sat, 17 Apr 1999 19:40:04 +0100 (WEST) From: Jose Gabriel Marcelino <gabriel@maquina.com> To: Doug Rabson <dfr@nlsystems.com> Cc: Peter Wemm <peter@netplex.com.au>, freebsd-current@freebsd.org Subject: Re: boot kernel panic with the latest new-bus Message-ID: <Pine.BSF.4.05.9904171935230.290-100000@devils.int.maquina.com> In-Reply-To: <Pine.BSF.4.05.9904171831420.51054-100000@herring.nlsystems.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 17 Apr 1999, Doug Rabson wrote: > I think we aren't picking up the PCI-ISA bridge chip which means that the > isa bus didn't get probed. Could you do a verbose boot (boot -v) of your > *old* kernel and post the resulting dmesg. Ok. Here it is. This is the biggest I could get. I had some trouble to get it too (I had to turn off most of the SCSI chain and boot single mode :), how can one increase the size of the dmesg buffer btw??) 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative Write Allocate Enable Limit: 128M bytes Write Allocate 15-16M bytes: Disable Hardware Write Allocate Control: Enable real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x002e1000 - 0x07ffdfff, 131190784 bytes (32029 pages) avail memory = 127750144 (124756K bytes) Found BIOS32 Service Directory header at 0xc00f99e0 Entry = 0xf0490 (0xc00f0490) Rev = 0 Len = 1 PCI BIOS entry at 0x4c0 DMI header at 0xc00f51c0 Version 2.0 Table at 0xf51da, 31 entries, 973 bytes Other BIOS signatures found: ACPI: 00000000 $PnP: 000fced0 Preloaded elf kernel "kernel.stable" at 0xc02c8000. VESA: information block 56 45 53 41 00 02 31 77 00 c0 01 00 00 00 22 00 00 01 40 00 05 01 46 77 00 c0 4d 77 00 c0 56 77 00 c0 00 01 01 01 02 01 03 01 05 01 07 01 08 01 09 01 0b 01 0c 01 10 01 11 01 12 01 13 01 14 01 VESA: 24 mode(s) found pci_open(1): mode 1 addr port (0x0cf8) is 0x80006000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=55911039) Probing for devices on PCI bus 0: found-> vendor=0x1039, dev=0x5591, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[0]: type 1, range 32, base e0000000, size 26 chip0: <Host to PCI bridge (vendor=1039 device=5591)> rev 0x02 on pci0.0.0 found-> vendor=0x1039, dev=0x5513, revid=0xd0 class=01-01-8a, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=0 map[0]: type 4, range 32, base 0000e400, size 3 map[1]: type 4, range 32, base 0000e000, size 2 map[2]: type 4, range 32, base 0000d800, size 3 map[3]: type 4, range 32, base 0000d400, size 2 map[4]: type 4, range 32, base 0000d000, size 4 ata-pci0: <Unknown PCI IDE controller> rev 0xd0 int a irq 0 on pci0.0.1 ata-pci0: Busmastering DMA not enabled found-> vendor=0x1039, dev=0x0008, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 chip1: <SiS 85c503> rev 0x01 on pci0.1.0 found-> vendor=0x1039, dev=0x0009, revid=0x00 class=ff-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1039, dev=0x7001, revid=0x11 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[0]: type 1, range 32, base df800000, size 12 found-> vendor=0x1039, dev=0x0001, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 chip2: <PCI to PCI bridge (vendor=1039 device=0001)> rev 0x00 on pci0.2.0 found-> vendor=0x10ec, dev=0x8029, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[0]: type 4, range 32, base 0000b800, size 5 ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 9 on pci0.10.0 ed1: address 00:00:1c:01:9d:d9, type NE2000 (16 bit) bpf: ed1 attached found-> vendor=0x1000, dev=0x0001, revid=0x01 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[0]: type 4, range 32, base 0000b400, size 8 map[1]: type 1, range 32, base df000000, size 8 ncr0: <ncr 53c810 fast10 scsi> rev 0x01 int a irq 10 on pci0.11.0 ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo ncr0: single-ended, open drain IRQ driver found-> vendor=0x102b, dev=0x051a, revid=0x03 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[0]: type 3, range 32, base e7000000, size 23 map[1]: type 1, range 32, base de800000, size 14 map[2]: type 1, range 32, base de000000, size 23 vga0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> rev 0x03 int a irq 11 on pci0.12.0 Probing for devices on PCI bus 1: Initializing PnP override table Probing for PnP devices: Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 No Plug-n-Play devices were found Probing for devices on the ISA bus: atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0 on isa sc0: fb0 kbd0 sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 90 03 3c psm: status 90 03 3c psm: status 90 03 3c psm: status 00 00 3c psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A ppc: parallel port found at 0x378 ppc0: 0x87 - 0x8 0x0 0xff 0x10 0x0 0x0 0x5 0x0 0x0 0x8c 0xff 0xc 0x28 0xab 0x0 0x0 0x0 0x0 0x0 0x0 0x7 0x0 0xff 0x0 0xff 0xff 0xde 0xfe 0xbe 0x3 0x25 0x43 0x0 ppc0: ECP SPP ppc0 at 0x378 irq 7 on isa ppc0: Winbond chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip: irq 7 plip0: <PLIP network interface> on ppbus 0 bpf: lp0 attached ppi0: <generic parallel i/o> on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc02814a2 (1000022) VESA: Matrox Graphics Inc. VESA: Matrox VESA: MYSTIQUE VESA: 00 npx0 on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 82863771 bytes/sec bzero() bandwidth = 104723007 bytes/sec imasks: bio c0080000, tty c007129a, net c007129a BIOS Geometries: 0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 0 accounted for Device configuration finished. bpf: tun0 attached bpf: sl0 attached bpf: ppp0 attached new masks: bio c0080000, tty c007129a, net c007129a bpf: lo0 attached Linux-ELF exec handler installed Waiting 5 seconds for SCSI devices to settle ncr0: restart (scsi reset). pass0 at ncr0 bus 0 target 0 lun 0 pass0: <QUANTUM FIREBALL1080S 1Q09> Fixed Direct Access SCSI-2 device pass0: Serial Number 341520410988 pass0: 10.000MB/s transfers (10.000MHz, offset 8) da0 at ncr0 bus 0 target 0 lun 0 da0: <QUANTUM FIREBALL1080S 1Q09> Fixed Direct Access SCSI-2 device da0: Serial Number 341520410988 da0: 10.000MB/s transfers (10.000MHz, offset 8) da0: 1042MB (2134305 512 byte sectors: 255H 63S/T 132C) Considering FFS root f/s. changing root device to da0s1a da0s1: type 0xa5, start 62, end = 2133295, size 2133234 : OK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9904171935230.290-100000>