Date: Thu, 2 Mar 2000 12:19:47 -0500 (EST) From: <up@3.am> To: Matthew Jacob <mjacob@feral.com> Cc: scsi@FreeBSD.ORG Subject: Re: Can't see DLT4000 Message-ID: <Pine.BSF.4.10.10003021218300.5396-100000@richard2.pil.net> In-Reply-To: <Pine.BSF.4.10.10003020913280.86005-100000@beppo.feral.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 2 Mar 2000, Matthew Jacob wrote: > Don't mix differential with single ended. It's an electrical thing- it's very > bad to mix the two- you run the risk of damaging the SE components. ok...but what if they're on a separate SCSI bus? I have the hard drives on channel A (LVD ultra everything) and the tape drive *alone* on channel B. Does that make a difference? > On Thu, 2 Mar 2000 up@3.am wrote: > > > > > I just upgraded our tape drive from a DDS-2 DAT to a Quantum DLT4000 and > > can't seem to get the system to see the DLT, no matter what. If I switch > > back to the DDS2 and reboot, mt sees it fine. A rundown: > > > > Both are External SCSI drives set to SCSI ID 4 > > > > used the same terminator and cable > > > > I've rebooted several times > > > > The SCSI host adapter is an on-board Adaptec AIC-7896 (Intel L440GX+) > > using the second (B) SCSI bus. When I have the DDS-2 drive hooked up, the > > server's drive light functions normally (blinks when accessed), when I > > hook up the DLT, it just stays on. > > > > The only difference I can see is that the DLT is "differential" SCSI, > > which, AFAIK, just allows it to work with a longer bus. Is there > > something that has to be done to the host adapter to accomodate > > differential devices? > > > > TIA, > > > > James Smallacombe PlantageNet, Inc. CEO and Janitor > > up@3.am http://3.am > > ========================================================================= > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-scsi" in the body of the message > > > > James Smallacombe PlantageNet, Inc. CEO and Janitor up@3.am http://3.am ========================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10003021218300.5396-100000>