Date: Wed, 14 Jun 2000 03:52:24 -0700 (PDT) From: Julian Elischer <julian@elischer.org> To: imp@village.org Cc: Chris Csanady <cc@ameslab.gov>, freebsd-hackers@FreeBSD.ORG Subject: Re: PCI Wavelan adapter timeouts Message-ID: <Pine.BSF.4.10.10006140351300.59354-100000@InterJet.elischer.org>
next in thread | raw e-mail | index | archive | help
> In message <393EB0DD.B77711B4@ameslab.gov> Chris Csanady writes:
> : Has anyone one successfully used one of these? I have read through
> : the list archives, but I never saw the problems resolved. I have
> : tried 4.0, and current with no luck. My dmesg output looks like:
> :
> : pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 10.0 on
pci0
> : pcic-pci0: TI12XX PCI Config Reg: [pwr save][pci only]
> : pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 10.1 on
pci0
> : pcic-pci1: TI12XX PCI Config Reg: [pwr save][pci only]
> :
> : pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
> : pcic0: management irq 10
> : pccard0: <PC Card bus -- kludge version> on pcic0
> : pccard1: <PC Card bus -- kludge version> on pcic0
> :
> : wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 7 slot 0 on pccard0
well I'm typing this across the following:
pccard: card inserted, slot 0
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 9 slot 0 on pccard0
wi0: Ethernet address: 00:60:1d:1e:42:6c
I'm not seeing problems there..
(though dhclient doesn't seem to work on it for some reason)
>
> Do you have any other hardware on IRQ 7. Note, I didn't ask if you
> had any other driver at IRQ 7, but any other hardware at all. You
> can't share interrupts. You'll have to disable the parallel printer
> port in your BIOS to be able to use IRQ 7. The device timeout is a
> classic case of IRQ misconfiguration.
>
> : Neither irq 7, or 10 conflict with anything else.
>
> Again, have you disabled the IRQ 7 sources (eg parallel port) in the
> BIOS, otherwise there will be a conflict.
>
> I'm not sure that anybody has gotten these to work. I do know that
> 4.0 RELEASE will not properly work all the time with these devices,
> and that you need 4.0 STABLE from approx middle of March to even have
> a chance.
>
> Warner
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-hackers" in the body of the message
--
^
|
__--_|\ Julian Elischer
/ \ julian@elischer.org
( OZ ) World tour 2000
)_.---._/ presently in: Singapore
v
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10006140351300.59354-100000>