Date: Tue, 20 Apr 1999 17:26:23 +0200 (SAST) From: Khetan Gajjar <khetan@chain.freebsd.os.org.za> To: Doug Rabson <dfr@nlsystems.com> Cc: freebsd-current@FreeBSD.ORG Subject: Re: PCI VGA card becomes ISA Message-ID: <Pine.BSF.4.10.9904201722590.3070-100000@chain.freebsd.os.org.za> In-Reply-To: <Pine.BSF.4.05.9904200949120.85882-100000@herring.nlsystems.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Around Today, "Doug Rabson" wrote :
DR> Its harmless and it should go away soon if we can reorganise syscons' vga
DR> driver slightly.
I'm seeing this as well, but as you've said, it's harmless.
What I am "concerned" about is from sources last night,
the error
haveseen_isadev() called - FIXME!
after the isa0 bus has been probed, and something I haven't seen before :
(cd1:aha0:0:6:0): CCB 0xc51952e0 - timed out
indicating a problem with my Yamaha CD-RW.
Is this something serious ?
As an aside, I'm trying Soren's ATA code, and it combined with
the new-bus changes (neither of which I was using before) has made a
dramatic difference speed-wise (or maybe it's just a
placebo effect). Nice work :)
Dmesg below.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Tue Apr 20 13:00:36 SAST 1999
khetan@chain.freebsd.os.org.za:/usr/src/sys/compile/CHAIN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 200455994 Hz
CPU: Pentium/P54C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 100663296 (98304K bytes)
avail memory = 94699520 (92480K bytes)
Preloaded elf kernel "kernel" at 0xc02d9000.
ccd0-1: Concatenated disk drivers
Probing for PnP devices:
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Host to PCI bridge (vendor=1039 device=5591)> at device 0.0 on pci0
ata0: <Unknown PCI IDE controller> at device 0.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1039 device=0001)> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
de0: <Digital 21041 Ethernet> at device 11.0 on pci0
de0: interrupting at irq 5
de0: SMC 21041 [10Mb/s] pass 1.1
de0: address 00:00:c0:f9:2f:c8
isa0: <ISA bus> on motherboard
haveseen_isadev() called - FIXME!
aha0 at port 0x330-0x333 irq 11 drq 6 on isa0
aha0: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs
aha0: interrupting at irq 11
atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0
atkbd0: <AT Keyboard> on atkbdc0
atkbd0: interrupting at irq 1
psm0: <PS/2 Mouse> on atkbdc0
psm0: model IntelliMouse, device ID 3
psm0: interrupting at irq 12
vga0: <Generic ISA VGA> on isa0
sc0: <System console> on isa0
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: interrupting at irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at irq 3
ppc0 at port 0x378 irq 7 on isa0
ppc0: Winbond chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
ppc0: interrupting at irq 7
de0: enabling 10baseT port
Intel Pentium detected, installing workaround for F00F bug
ata0: master: settting up generic WDMA2 mode OK
ad0: <WDC AC21000H/21.15T71> ATA-? disk at ata0 as master
ad0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
ad0: piomode=4, dmamode=2, udmamode=-1
ad0: 16 secs/int, 0 depth queue, DMA mode
ata0: slave: settting up generic WDMA2 mode OK
ad1: <QUANTUM FIREBALL1080A/A1M.0900> ATA-? disk at ata0 as slave
ad1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S
ad1: piomode=4, dmamode=2, udmamode=-1
ad1: 8 secs/int, 0 depth queue, DMA mode
ata1: master: settting up generic WDMA2 mode OK
ad2: <ST32140A/07.07.01> ATA-? disk at ata1 as master
ad2: 2015MB (4127760 sectors), 4095 cyls, 16 heads, 63 S/T, 512 B/S
ad2: piomode=4, dmamode=2, udmamode=-1
ad2: 16 secs/int, 0 depth queue, DMA mode
Waiting 15 seconds for SCSI devices to settle
changing root device to wd1s1a
da0 at aha0 bus 0 target 2 lun 0
da0: <QUANTUM LPS540S 5900> Fixed Direct Access SCSI-2 device
aha0: ahafetchtransinfo - Inquire Setup Info Failed
da0: 3.300MB/s transfers
da0: 516MB (1057616 512 byte sectors: 64H 32S/T 516C)
da1 at aha0 bus 0 target 4 lun 0
da1: <CONNER CFA540S 14B1> Fixed Direct Access SCSI-2 device
da1: 3.300MB/s transfers
da1: 515MB (1056708 512 byte sectors: 64H 32S/T 515C)
cd0 at aha0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:502 2.0r> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [325725 x 2048 byte records]
(cd1:aha0:0:6:0): CCB 0xc51952e0 - timed out
(cd1:aha0:0:6:0): CCB 0xc51952e0 - timed out
aha0: No longer in timeout
cd1 at aha0 bus 0 target 6 lun 0
cd1: <YAMAHA CRW4260 1.0q> Removable CD-ROM SCSI-2 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9904201722590.3070-100000>