Date: Fri, 3 Sep 1999 18:38:32 -0400 (EDT) From: "Chris D. Faulhaber" <jedgar@fxp.org> To: Doug Rabson <dfr@nlsystems.com> Cc: current@freebsd.org Subject: Re: Need testers for aha driver change Message-ID: <Pine.BSF.4.10.9909031830100.81789-100000@pawn.primelocation.net>
next in thread | raw e-mail | index | archive | help
Doug Rabson wrote: > I have just taken a pass through the aha_isa driver to convert it to > newbus and to make it use the new pnp system. Unfortunately I don't own > the hardware so I need testers, preferably with both non-pnp and pnp > cards. The code does compile but I have not tested it at all. Here is > the patch: Seems to work here. I have a: (set up to be non-PnP) aha0 at port 0x130-0x133,0x130-0x133 irq 10 drq 6 on isa0 aha0: AHA-1542CP FW Rev. F.0 (ID=46) SCSI Host Adapter, SCSI ID 7, 16 CCBs with the following attached to it: sa0 at aha0 bus 0 target 2 lun 0 sa0: <SONY SDX-300C 04b1> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 8) cd0 at aha0 bus 0 target 3 lun 0 cd0: <MATSHITA CD-ROM CR-508 XS03> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: cd present [312833 x 2048 byte records] cd1 at aha0 bus 0 target 5 lun 0 cd1: <PHILIPS CDD2600 1.07> Removable CD-ROM SCSI-2 device cd1: 3.300MB/s transfers cd1: cd present [306027 x 2048 byte records] CD's can be read fine; tapes seem to write and read correctly. The only thing I haven't tried is to write a CD... Let me know if there is any more info I can provide. Regards, Chris ----- Chris D. Faulhaber <jedgar@fxp.org> | All the true gurus I've met never System/Network Administrator, | claimed they were one, and always Reality Check Information, Inc. | pointed to someone better. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909031830100.81789-100000>