Date: Sat, 22 Jan 2000 22:38:41 -0800 (PST) From: Gorden Fischer <gfish123@pacbell.net> To: mobile@freebsd.org Subject: Vaio 505S + fdc driver Message-ID: <Pine.BSF.4.21.0001222233180.27574-100000@uniqsite.com>
next in thread | raw e-mail | index | archive | help
Has anyone try to make the fdc driver work for Vaio 505S? The drive is
attached to a replicator (looks and feels like a USB device for me).
I am unable to mount the floppy disk. The dmesg output verifies the
problem. Is this problem been asked before? If so, can you tell me how
to make it work?
Fischer
dmesg output:
========================================================================
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-RELEASE #0: Sat Jan 22 21:11:24 PST 2000
root@sony.uniqsite.com:/usr/src/sys/compile/Sony
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (331.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67108864 (65536K bytes)
avail memory = 62357504 (60896K bytes)
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge (AGP disabled)> rev 0x03 on pci0.0.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x08 int a irq 9 on pci0.6.0
fxp0: Ethernet address 08:00:46:04:57:a0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
uhci0: <Intel 82371AB/EB USB Host Controller> rev 0x01 int d irq 9 on pci0.7.2
chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
vga0: <NeoMagic model 0005 VGA-compatible display device> rev 0x12 int a irq 9 on pci0.8.0
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> rev 0x00 int a irq 255 on pci0.10.0
RL5C4XX PCI Config Reg: [CSC isa irq]
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
pcm0 not found
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 flags 0x800 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 not found at 0x3f0
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <IBM-DBCA-206480>, DMA, 32-bit, multi-block-16
wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
pcic0 at 0x3e0-0x3e1 irq 11 on isa
PC-Card ctlr(0) Ricoh RL5C475/476 [CardBus bridge mode] (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
pcic1: sharing irq 11 with other pcic
pcic1 not found at 0x3e2
pcic1: sharing irq 11 with other pcic
pcic1 not found at 0x3e4
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
usb0: <Intel 82371AB/EB USB Host Controller>
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Initializing PC-card drivers: fdc sio wdc
changing root device to wd0s2a
Card inserted, slot 0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0001222233180.27574-100000>