Date: Sun, 23 Jan 2000 23:56:39 -0800 (PST) From: Kris Kennaway <kris@hub.freebsd.org> To: current@freebsd.org Subject: Missing ATAPI CD Message-ID: <Pine.BSF.4.21.0001232353360.79986-100000@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
Since the most recent round of ATA updates, my CDROM is no longer even
probed at boot time.
device ata0
device atadisk0
device atapicd0
options ATA_STATIC_ID
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #9: Sun Jan 23 23:20:33 PST 2000
kkenn@morden.rebel.net.au:/usr5/src2/src/sys/compile/MORDEN
Calibrating clock(s) ... TSC clock: 120041864 Hz, i8254 clock: 1193600 Hz
Timecounter "i8254" frequency 1193600 Hz
Timecounter "TSC" frequency 120041864 Hz
CPU: Pentium/P54C (120.04-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x0038b000 - 0x02feffff, 46551040 bytes (11365 pages)
avail memory = 45232128 (44172K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fac90
bios32: Entry = 0xfb150 (c00fb150) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb180
pnpbios: Found PnP BIOS data at 0xc00fb9f0
pnpbios: Entry = f0000:ba18 Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Intel Pentium detected, installing workaround for F00F bug
VESA: information block
56 45 53 41 02 01 48 56 00 c0 00 00 00 00 8f 56
00 c0 20 00 de c0 ad de de c0 ad de de c0 ad de
de c0 ad de de c0 ad de de c0 ad de de c0 ad de
de c0 ad de de c0 ad de de c0 ad de de c0 ad de
VESA: 29 mode(s) found
VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c568f (c000568f)
VESA: Tseng Labs ET4000
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=122d8086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 155787505 bytes/sec
bzero() bandwidth = 78076202 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=122d8086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x122d, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x122e, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1230, revid=0x02
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00003000, size 4
found-> vendor=0x100c, dev=0x3206, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f0000000, size 24
found-> vendor=0x9004, dev=0x5078, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00006000, size 8
map[14]: type 1, range 32, base f1000000, size 12
pci0: <PCI bus> on pcib0
CPU Inactivity timer: clocks
Peer Concurrency: enabled
CPU-to-PCI Write Bursting: enabled
PCI Streaming: enabled
Bus Concurrency: enabled
Cache: 256K pipelined-burst secondary; L1 enabled
DRAM: no memory hole, 60 MHz refresh
Read burst timing: x-2-2-2/x-3-3-3
Write burst timing: x-3-3-3
RAS-CAS delay: 3 clocks
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks
Extended BIOS: enabled
Lower BIOS: enabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: disabled, B: IRQ10, C: IRQ11, D: disabled
MB0: disabled, MB1: disabled
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX ATA controller> port 0x3000-0x300f at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x3000
ata0: mask=03 status0=50 status1=50
ata0: mask=03 status0=50 status1=50
ata0: devices = 0x3
ata0 at 0x01f0 irq 14 on ata-pci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x3008
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=50 status1=00
ata1: devices = 0x9
ata1 at 0x0170 irq 15 on ata-pci0
vga-pci0: <Tseng Labs ET4000 W32P graphics accelerator> mem 0xf0000000-0xf0ffffff irq 11 at device 18.0 on pci0
ahc0: <Adaptec aic7850 SCSI adapter> port 0x6000-0x60ff mem 0xf1000000-0xf1000fff irq 10 at device 19.0 on pci0
ahc0: No SEEPROM available.
ahc0: Using left over BIOS settings
ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs
ahc0: Downloading Sequencer Program... 408 instructions downloaded
Trying Read_Port at 203
Trying Read_Port at 243
CTL0031: start dependant
CTL0031: adding irq mask 0x20
CTL0031: adding dma mask 0x2
CTL0031: adding dma mask 0x20
CTL0031: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0031: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding dma mask 0xe0
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0031: start dependant
CTL0031: adding irq mask 0x4a0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0031: start dependant
CTL0031: adding irq mask 0xca0
CTL0031: adding dma mask 0xb
CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0031: end dependant
CTL2011: start dependant
CTL2011: adding irq mask 0x400
CTL2011: adding io range 0x168-0x16f, size=0x8, align=0x1
CTL2011: adding io range 0x36e-0x36f, size=0x2, align=0x1
CTL2011: start dependant
CTL2011: adding irq mask 0x800
CTL2011: adding io range 0x1e8-0x1ef, size=0x8, align=0x1
CTL2011: adding io range 0x3ee-0x3ef, size=0x2, align=0x1
CTL2011: start dependant
CTL2011: adding irq mask 0x9c00
CTL2011: adding io range 0x100-0x1ff, size=0x8, align=0x8
CTL2011: adding io range 0x300-0x3ff, size=0x2, align=0x2
CTL2011: start dependant
CTL2011: adding irq mask 0x8000
CTL2011: adding io range 0x170-0x177, size=0x8, align=0x1
CTL2011: adding io range 0x376-0x376, size=0x1, align=0x1
CTL2011: end dependant
PNPffff: adding io range 0x100-0x3f8, size=0x1, align=0x8
CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00ff
kbdc: RESET_AUX return code:00ff
kbdc: RESET_AUX return code:00ff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <12 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
isa_probe_children: probing PnP devices
sbc0: <Creative SB16/SB32> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.13> on sbc0
pcm: setmap c000, 2000; 0xc4e5c000 -> c000
pcm: setmap e000, 2000; 0xc4e5e000 -> e000
ata2: iobase=0x01e8 altiobase=0x03ee bmaddr=0x0000
ata2: mask=00 status0=ff status1=ff
unknown0: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee-0x3ef irq 11 on isa0
unknown1: <Reserved> at port 0x100 on isa0
unknown2: <Game> at port 0x200-0x207 on isa0
BIOS Geometries:
0:03113f3f 0..785=786 cylinders, 0..63=64 heads, 1..63=63 sectors
1:026a7f3f 0..618=619 cylinders, 0..127=128 heads, 1..63=63 sectors
2:030efe3f 0..782=783 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio 4008c040, tty 4003003a, net 4007003a
bpf: lo0 attached
Linux-ELF exec handler installed
IPsec: Initialized Security Association Processing.
IP Filter: initialized. Default = pass all, Logging = enabled
IP Filter: v3.3.6
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata1-slave : drive wont come ready after identify
ata0-master: success setting up WDMA2 mode on PIIX chip
ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
ad0: <WDC AC31600H/21.15T2> ATA-0 disk at ata0 as master
ad0: 1549MB (3173184 sectors), 3148 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, WDMA2
Creating DISK ad0
Creating DISK wd0
ata0-slave: success setting up WDMA2 mode on PIIX chip
ad1: piomode=4 dmamode=2 udmamode=2 cblid=0
ad1: <WDC AC22500L/32.41N3> ATA-3 disk at ata0 as slave
ad1: 2441MB (4999680 sectors), 4960 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, WDMA2
Creating DISK ad1
Creating DISK wd1
ata1-master: success setting up WDMA2 mode on PIIX chip
ad2: piomode=4 dmamode=2 udmamode=2 cblid=0
ad2: <WDC AC26400R/15.01J5> ATA-4 disk at ata1 as master
ad2: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
ad2: 16 secs/int, 1 depth queue, WDMA2
Creating DISK ad2
Creating DISK wd2
Mounting root from ufs:wd0s2a
wd0s1: type 0x6, start 63, end = 1745855, size 1745793 : OK
wd0s2: type 0xa5, start 1745856, end = 3173183, size 1427328 : OK
start_init: trying /sbin/init
ad1s1: type 0x6, start 63, end = 2048255, size 2048193 : OK
ad1s2: type 0x5, start 2048256, end = 3072383, size 1024128 : OK
ad1s3: type 0xa5, start 3072384, end = 4999679, size 1927296 : OK
ad1s5: type 0x6, start 2048319, end = 3072383, size 1024065 : OK
ad2: ad_timeout: lost disk contact - resetting
ata1: resetting devices .. ata1: mask=01 status0=50 status1=00
ata1-master: success setting up WDMA2 mode on PIIX chip
done
ad2: ad_timeout: lost disk contact - resetting
ata1: resetting devices .. ata1: mask=01 status0=50 status1=00
ata1-master: success setting up WDMA2 mode on PIIX chip
done
ad2: ad_timeout: lost disk contact - resetting
ata1: resetting devices .. ata1: mask=01 status0=50 status1=00
ata1-master: success setting up WDMA2 mode on PIIX chip
done
ad2: ad_timeout: lost disk contact - resetting
ata1-master: success setting up PIO4 mode on generic chip
ad2: ad_timeout: trying fallback to PIO mode
ata1: resetting devices .. ata1: mask=01 status0=50 status1=00
ata1-master: success setting up WDMA2 mode on PIIX chip
done
ad2s1: type 0xa5, start 63, end = 4193909, size 4193847 : OK
ad2s2: type 0xa5, start 4193910, end = 8387819, size 4193910 : OK
ad2s3: type 0xa5, start 8387820, end = 12594959, size 4207140 : OK
ad2s1: type 0xa5, start 63, end = 4193909, size 4193847 : OK
ad2s2: type 0xa5, start 4193910, end = 8387819, size 4193910 : OK
ad2s3: type 0xa5, start 8387820, end = 12594959, size 4207140 : OK
ad2s1: type 0xa5, start 63, end = 4193909, size 4193847 : OK
ad2s2: type 0xa5, start 4193910, end = 8387819, size 4193910 : OK
ad2s3: type 0xa5, start 8387820, end = 12594959, size 4207140 : OK
ad2s1: type 0xa5, start 63, end = 4193909, size 4193847 : OK
ad2s2: type 0xa5, start 4193910, end = 8387819, size 4193910 : OK
ad2s3: type 0xa5, start 8387820, end = 12594959, size 4207140 : OK
ad2s1: type 0xa5, start 63, end = 4193909, size 4193847 : OK
ad2s2: type 0xa5, start 4193910, end = 8387819, size 4193910 : OK
ad2s3: type 0xa5, start 8387820, end = 12594959, size 4207140 : OK
Kris
----
"How many roads must a man walk down, before you call him a man?"
"Eight!"
"That was a rhetorical question!"
"Oh..then, seven!" -- Homer Simpson
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0001232353360.79986-100000>