Date: Sun, 9 Apr 2000 14:55:35 -0400 (EDT) From: Steve Quirk <squirk@home.com> To: freebsd-stable@FreeBSD.ORG Subject: can't get fxp working on ca810 mobo Message-ID: <Pine.BSF.4.21.0004091442080.6071-100000@cc677580-a.sumt1.nj.home.com>
next in thread | raw e-mail | index | archive | help
I've got an Intel ca810e motherboard with integrated EEPro100. I can't
seem to get the fxp0 working and I'm not sure why.
I did a base install from the 4.0 CD image and couldn't get it working. I
upgraded to -STABLE (cvssup on Fri evening) by copying /usr/src from
another host (burned it onto CD and copied it over). And did a make
build & installworld, but still no luck.
Is this known not to work? I didn't see anything really damning by
searching around the net. The install and make process went without any
trouble.
I've never had any trouble like this, but this is my 1st non-440 based
motherboard.
If anyone could shed some light or point me at any resource, I'd be really
grateful.
Thanks,
Steve
Here's the relevant information:
****** uname
cirww1# uname -a
FreeBSD cc677580-a.sumt1.nj.home.com 4.0-STABLE FreeBSD 4.0-STABLE #3: Sun
Apr 9 21:15:03 EDT 2000
root@cirwww1.sumt1.nj.home.com:/usr/src/sys/compile/CIRWWW i386
****** /etc/rc.conf
# -- sysinstall generated deltas -- #
ifconfig_fxp0="inet 192.168.1.100 netmask 255.255.255.0 media 100baseTX"
hostname="cirwww1.sumt1.nj.home.com"
linux_enable="YES"
defaultrouter="192.168.1.1"
firewall_enable="YES"
firewall_type="OPEN"
#
nfs_client_enable="YES"
****** dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Sun Apr 9 21:15:03 EDT 2000
root@cirwww1.sumt1.nj.home.com:/usr/src/sys/compile/CIRWWW
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (730.97-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 535560192 (523008K bytes)
config> di psm0
config> di ata1
config> di ata0
config> q
avail memory = 517681152 (505548K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "kernel" at 0xc035f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035f09c.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 11
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xdd80-0xddbf mem 0xff500000-0xff5fffff,0xff8fd000-0xff8fdfff irq 9 at device 1.0 on pci1
fxp0: Ethernet address 00:90:27:f9:14:6d
fxp0: supplying EUI64: 00:90:27:ff:fe:f9:14:6d
pci1: <unknown card> (vendor=0x1274, dev=0x1371) at 7.0 irq 11
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xd800-0xd8ff mem 0xff8ff000-0xff8fffff irq 10 at device 9.0 on pci1
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
fxp1: <Intel EtherExpress Pro 10/100B Ethernet> port 0xdf00-0xdf3f mem 0xff700000-0xff7fffff,0xff8fe000-0xff8fefff irq 11 at device 10.0 on pci1
fxp1: Ethernet address 00:90:27:a5:f2:6e
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
pci0: <Intel 82801AA (ICH) USB controller> at 31.2 irq 9
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
IPsec: Initialized Security Association Processing.
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <TOSHIBA CD-ROM XM-6401TA 1015> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
fxp0: starting DAD for fe80:0001::0290:27ff:fef9:146d
fxp0: DAD complete for fe80:0001::0290:27ff:fef9:146d - no duplicates found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0004091442080.6071-100000>