Date: Sat, 12 Aug 2000 18:57:29 -0500 (CDT) From: Doug Lee <dgl@visi.com> To: freebsd-stable@freebsd.org Subject: Can't build kernel in 4.1 snapshot? Message-ID: <Pine.BSF.4.21.0008121855490.59349-100000@kirk.dsl.visi.com>
next in thread | raw e-mail | index | archive | help
I am running a 4.1 snapshot from August 6 on a P100 with 16M memory
(soon to increase). `dmesg' output appears below. I just tried
building a custom kernel and got compile errors during `make' (`make
depend' ran fine). I used the config/cd/make method rather than the
`make buildkernel' method because I haven't done a `make world' on
this machine (and hope not to before it gets more memory). Is there a
problem building kernels in the 4.1-20000806-STABLE snapshot?
I give first the last compile line and the set of errors, then `dmesg'
output, and finally a de-commentized version of my kernel config file,
/usr/src/sys/i386/conf/BLINDINC. (Blindness: Learning In New
Dimensions (BLIND), Inc. is where this machine will soon be
installed.)
-----The error message-----
cc -c -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 -fomit-frame-pointer ../../i386/i386/atomic.c
In file included from ../../i386/i386/atomic.c:47:
machine/atomic.h: In function `atomic_set_char':
machine/atomic.h:106: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_clear_char':
machine/atomic.h:107: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_add_char':
machine/atomic.h:108: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_subtract_char':
machine/atomic.h:109: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_set_short':
machine/atomic.h:111: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_clear_short':
machine/atomic.h:112: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_add_short':
machine/atomic.h:113: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_subtract_short':
machine/atomic.h:114: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_set_int':
machine/atomic.h:116: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_clear_int':
machine/atomic.h:117: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_add_int':
machine/atomic.h:118: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_subtract_int':
machine/atomic.h:119: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_set_long':
machine/atomic.h:121: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_clear_long':
machine/atomic.h:122: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_add_long':
machine/atomic.h:123: inconsistent operand constraints in an `asm'
machine/atomic.h: In function `atomic_subtract_long':
machine/atomic.h:124: inconsistent operand constraints in an `asm'
*** Error code 1
Stop in /usr/src/sys/compile/BLINDINC.
-----Relevant dmesgoutput-----
FreeBSD 4.1-20000806-STABLE #0: Sun Aug 6 12:05:39 GMT 2000
root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (99.72-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 16777216 (16384K bytes)
avail memory = 12451840 (12160K bytes)
Preloaded elf kernel "kernel" at 0xc0410000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <S3 Trio graphics accelerator> at 15.0 irq 11
dc0: <82c169 PNIC 10/100BaseTX> port 0xfc00-0xfcff mem 0xfffbfc00-0xfffbfcff irq 10 at device 16.0 on pci0
dc0: Ethernet address: 00:a0:cc:5b:60:cb
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3b0-0x3cf iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA (mono) <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
adv1: Invalid baseport of 0x3e8 specified. Nearest valid baseport is 0x330. Failing probe.
sio4: <U.S.Robotics Inc. Sportster 56000 Voice Internal> at port 0x3e8-0x3ef irq 5 on isa0
sio4: type 16550A
ad0: 1039MB <QUANTUM FIREBALL1080A> [2112/16/63] at ata0-master using WDMA2
acd0: CDROM <HITACHI CDR-7730> at ata1-master using PIO2
Mounting root from ufs:/dev/ad0s1a
-----My kernel config-----
# NOTE: All I took out of this config is the adv0 device, because
# it caused a (harmless but annoying) message on boot about
# trying to use an invalid IO address range which just happened to be
# 3E8-3EF, the range used by the modem (sio4).
machine i386
cpu I486_CPU
cpu I586_CPU
ident BLINDINC
makeoptions KERNEL=kernel
maxusers 32
options INET
options INET6
options IPSEC
options IPSEC_ESP
options IPSEC_DEBUG
options FFS
options FFS_ROOT
options SOFTUPDATES
options MFS
options MD_ROOT
options NFS
options NFS_ROOT
options MSDOSFS
options CD9660
options CD9660_ROOT
options PROCFS
options KERNFS
options COMPAT_43
options SCSI_DELAY=15000
options UCONSOLE
options USERCONFIG
options VISUAL_USERCONFIG
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM
options KBD_INSTALL_CDEV
device isa
options AUTO_EOI_1
device eisa
device pci
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk
device atapicd
device atapifd
device atapist
options ATA_STATIC_ID
device ahb
device ahc
device amd
device dpt
device isp
device ncr
device sym
options SYM_SETUP_LP_PROBE_MAP=0x40
device adw
device bt0 at isa?
device aha0 at isa?
device aic0 at isa?
device scbus
device da
device sa
device cd
device pass
device ida
device amr
device mlx
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device vga0 at isa?
pseudo-device splash
device sc0 at isa? flags 0x100
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20
device card
device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
device sio0 at isa? port IO_COM1 flags 0x30 irq 4
options CONSPEED=115200
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
device ppc0 at isa? irq 7
device ppbus
device lpt
device plip
device ppi
device de
device fxp
device tx
device vx
device wx
device miibus
device dc
device rl
device sf
device sis
device ste
device tl
device vr
device wb
device xl
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
device ex
device ep
device wi
device an
device xe
device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
device fe0 at isa? port 0x300
device le0 at isa? port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 irq 10 drq 0
device cs0 at isa? port 0x300
device sn0 at isa? port 0x300 irq 10
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun
pseudo-device pty
pseudo-device md
pseudo-device gif 4
pseudo-device faith 1
pseudo-device bpf
device uhci
device ohci
device usb
device ugen
device uhid
device ukbd
device ulpt
device umass
device ums
device aue
device cue
device kue
pseudo-device speaker
device pca0 at isa? port IO_TIMER1
pseudo-device snp 3
pseudo-device ccd 4
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_FORWARD
options IPV6FIREWALL
options IPV6FIREWALL_VERBOSE
options IPDIVERT
options IPFILTER
options IPFILTER_LOG
options TCP_RESTRICT_RST
options QUOTA
options NETGRAPH
options DDB
options DDB_UNATTENDED
--
Doug Lee
dgl@visi.com
http://www.visi.com/~dgl
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0008121855490.59349-100000>