Date: Tue, 3 Oct 2000 15:04:53 -0400 (EDT) From: Valentin Chopov <valentin@valcho.net> To: freebsd-current@freebsd.org Subject: ATA DMA support is broken Message-ID: <Pine.BSF.4.21.0010031455520.479-100000@valcho.net>
next in thread | raw e-mail | index | archive | help
After last changes ata DMA support is not workind and atapicd is not recognized on Toshiba Tecra-8100 (FreeBSD-5.0-CURRENT) Val ------------ Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #5: Tue Oct 3 14:33:01 EDT 2000 root@valsei.valcho.net:/usr/src/sys/compile/VALCHO Timecounter "i8254" frequency 1193176 Hz CPU: Pentium III/Pentium III Xeon/Celeron (647.60-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134086656 (130944K bytes) avail memory = 123797504 (120896K bytes) Preloaded elf kernel "kernel" at 0xc065d000. Pentium Pro MTRR support enabled VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc05d2182 (1000022) VESA: S3 Incorporated. M7 BIOS md0: Malloc disk apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <S3 model 8c10 graphics accelerator> at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0 atapci0: Busmastering DMA enabled uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <Intel 82371AB Power management controller> at 5.3 pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3 pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11 pci0: <PCI to CardBus bridge (vendor=1179 device=0617)> at 11.0 pci0: <PCI to CardBus bridge (vendor=1179 device=0617)> at 11.1 pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefffffff irq 11 at device 12.0 on pci0 acpi0: <TOSHIB> on motherboard fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0f13> can't assign resources unknown: <PNP0c02> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0401> can't assign resources IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled IPv6 packet filtering initialized, default to accept, logging disabled IPsec: Initialized Security Association Processing. IP Filter: v3.4.9 initialized. Default = pass all, Logging = disabled ata1-master: identify retries exceeded ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master BIOSPIO Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 1 ep0: <3Com 3C556> at port 0x240-0x25f irq 5 slot 1 on pccard1 ep0: Ethernet address 00:00:86:52:40:af To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0010031455520.479-100000>