Date: Thu, 20 Sep 2001 08:42:21 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Jos Backus <josb@cncdsl.com> Cc: scsi@FreeBSD.ORG Subject: Re: sa problems Message-ID: <Pine.BSF.4.21.0109200842010.33328-100000@beppo> In-Reply-To: <20010919235751.A605@lizzy.bugworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
media error followed by not ready. the blinking yellow is the giveaway. Bad tape, and you now should clean the heads. On Wed, 19 Sep 2001, Jos Backus wrote: > Is anybody else having problems with tape drives with tonight's -current? > While trying to create a backup on my > > sa0: <HP C1533A A708> Removable Sequential Access SCSI-2 device > > I am seeing > > mt: /dev/nsa0: Device not configured > > in response to > > mt rew > > CAMDEBUG output: > > Sep 19 23:53:34 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): saopen(0): dev=0x0 softc=0x0 > Sep 19 23:53:34 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): sastart(sa0:ahc0:0:3:0): sastart(sa0:ahc0:0:3:0): CDB[0]=0x0 Key 0x2 ASC/ASCQ 0x4/0x2 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > Sep 19 23:53:35 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1b Key 0x3 ASC/ASCQ 0x3b/0x0 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > Sep 19 23:53:36 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1b Key 0x3 ASC/ASCQ 0x3b/0x0 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > Sep 19 23:53:37 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1b Key 0x3 ASC/ASCQ 0x3b/0x0 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > Sep 19 23:53:37 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1 Key 0x2 ASC/ASCQ 0x4/0x2 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > Sep 19 23:53:38 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): CDB[0]=0x1 Key 0x2 ASC/ASCQ 0x4/0x2 CAM STATUS 0xc flags 0x0 resid 0 dxfer_len 0 > Sep 19 23:53:38 lizzy /boot/kernel/kernel: (sa0:ahc0:0:3:0): sastart > > Fwiw, the right light on the drive is blinking yellow after this, and I have > to power off the system to make it stop. I tried camcontrol reset without > success. > > Thanks, > -- > Jos Backus _/ _/_/_/ Santa Clara, CA > _/ _/ _/ > _/ _/_/_/ > _/ _/ _/ _/ > josb@cncdsl.com _/_/ _/_/_/ use Std::Disclaimer; > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0109200842010.33328-100000>