Date: Wed, 6 Mar 2002 15:14:09 -0800 (PST) From: Matthew Jacob <mjacob@feral.com> To: freebsd-sparc@freebsd.org Subject: more iso fun and games! Message-ID: <Pine.BSF.4.21.0203061444200.23706-100000@beppo>
next in thread | raw e-mail | index | archive | help
(I've just resubscribed, so I'll be able to contribute more)
U10- seems that something odd has happened there.
First of all- until isp is fixed, you should probably not have it config'd in
as a default- if it fails to attach, apparently the interrupt still is routed
and you die horribly.
Otherwise, the U10's CDROM seemed to have problems:
show: variable 'hints' not found
OK set hint.isp.0.disable=1
OK boot
nothing to autoload yet.
jumping to kernel entry at 0x80030000.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Mar 3 02:15:33 EST 2002
jake@k7.locore.ca:/usr/p4/sparc64/sys/sparc64/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0x80334000.
Timecounter "tick" frequency 300000000 Hz
cpu0: Sun Microsystems UltraSparc-IIi Processor (300.00 MHZ CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to dfffffff
pci0: <PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <network, ethernet> at device 1.0 (no driver attached)
isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x800-0x8ff mem 0x4000-0x4fff
irq 20 at device 2.0 on pci1
isp0: device is disabled
sym0: <875> port 0xc00-0xcff mem 0x8000-0x8fff,0x6000-0x60ff irq 24 at device
3.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x1000-0x10ff mem 0xc000-0xcfff,0xa000-0xa0ff irq 25 at
device 3.1 on pci1
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0
pci2: <PCI bus> on pcib2
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at
device 1.0 on pci2
ebus0: <auxio> addr
0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003
(no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
sio0 addr 0x14003083f8-0x14003083ff irq 41 on ebus0
sio0: type 16550A
sio1 addr 0x14003062f8-0x14003062ff irq 42 on ebus0
sio1: type 16550A
ebus0: <ecpp> addr
0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x14003043bc-0x14003043cb
irq 34 (no driver attached)
ebus0: <fdthree> addr
0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7
irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80a020e8
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr
0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff
irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff irq 33 at device 1.1
on pci2
hme0: Ethernet address: 08:00:20:a0:20:e8
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <display, VGA> at device 2.0 (no driver attached)
atapci0: <CMD 646 ATA controller> port
0xc00020-0xc0002f,0xc00018-0xc0001b,0xc00010-0xc00017,0xc00008-0xc0000b,0xc00000-0xc00007
irq 32 at device 3.0 on pci2
ata2: at 0xc00000 on atapci0
ata3: at 0xc00010 on atapci0
ad0: 2014MB <ST32122A> [4092/16/63] at ata2-master WDMA2
ad1: 3020MB <WDC AC33100H> [6136/16/63] at ata2-slave WDMA2
acd0: CDROM <CRD-8240B> at ata3-master PIO4
Waiting 2 seconds for SCSI devices to settle
sym0: suspicious SCSI data while resetting the BUS.
sym0: dp1,d15-8,dp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = 0x10100,
expecting 0x100
Mounting root from cd9660:cd0a
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from cd9660:acd0a
cd9660: RockRidge Extension
Invalid time in real time clock.
Check and reset the date immediately!
acd0: READ_BIG - NO SENSE asc=0x02 ascq=0x00 error=0x00
vm_fault: pager read error, pid 8 (sh)
Debugger("trapsig")
Stopped at Debugger+0x1c: ta %xcc, 1
db> t
trap() at trap+0x4d8
-- fast instruction access mmu miss tar=0x1040ca --
userland() at 0x104214
user trace: trap %o7 (leaf return) is 0x1038f4
pc 0x104214, sp 0x7fdfffff141
pc 0x10ccd4, sp 0x7fdfffff201
pc 0x10cc28, sp 0x7fdfffff2e1
pc 0x1001b0, sp 0x7fdfffff401
pc 0, sp 0x7fdfffff4c1
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0203061444200.23706-100000>