Date: Sat, 8 Jun 2002 13:28:44 -0700 (PDT) From: Nadav Eiron <nadav@TheEirons.org> To: freebsd-scsi@freebsd.org Subject: Problems using cdrecord and a Yamaha CRW4416S CD-RW drive Message-ID: <Pine.BSF.4.21_heb2.09.0206081322001.15590-100000@piglet.theeirons.org>
next in thread | raw e-mail | index | archive | help
Greetings,
I have a SCSI-only machine (AHA-2940U2 controller), running 4.5-STABLE
from early April. It has a Yamaha 4x4x16 CD-RW drive, that I can use fine
for reading (as /dev/cd1c), but I cannot get cdrecord to recognize. I.e.,
camcontrol shows it:
piglet# camcontrol devlist
<IBM DDRS-39130D DC1B> at scbus0 target 0 lun 0 (pass0,da0)
<IBM DDRS-39130D DC1B> at scbus0 target 2 lun 0 (pass1,da1)
<IBM DRVS09D 0100> at scbus0 target 3 lun 0 (pass2,da2)
<TEAC CD-ROM CD-532S 1.0A> at scbus0 target 5 lun 0 (pass3,cd0)
<YAMAHA CRW4416S 1.0g> at scbus0 target 6 lun 0 (pass4,cd1)
<SanDisk ImageMate II 1.30> at scbus1 target 0 lun 0 (da3,pass5)
But cdrecord -scanbus doesn't:
piglet# cdrecord -scanbus
Cdrecord 1.11a19 (i386-unknown-freebsd4.5) Copyright (C) 1995-2002 J=F6rg
Schilling
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) 'IBM ' 'DDRS-39130D ' 'DC1B' Disk
0,1,0 1) *
0,2,0 2) 'IBM ' 'DDRS-39130D ' 'DC1B' Disk
0,3,0 3) 'IBM ' 'DRVS09D ' '0100' Disk
0,4,0 4) *
cdrecord: Warning: controller returns zero sized CD capabilities page.
cdrecord: Warning: controller returns wrong size for CD capabilities page.
cdrecord: Warning: controller returns wrong page 0 for CD capabilities
page (2A).
0,5,0 5) 'TEAC ' 'CD-ROM CD-532S ' '1.0A' Removable CD-ROM
0,6,0 6) *
0,7,0 7) *
There has been a similar problem reported to questions@ in January (see
http://www.FreeBSD.org/cgi/getmsg.cgi?fetch=3D5958+8394+/usr/local/www/db/t=
ext/2002/freebsd-questions/20020120.freebsd-questions
) but it seems to have not been resolved. I don't know if the warnings
cdrecord gives for the TEAC CD-ROM have anything to do with it. FWIW, the
guy who reported the similar problem to questions didn't have any
warnings from cdrecord.
The CD-RW drive works fine on the same machine with WNT, and it also used
to work long ago (I haven't used it for a year, at least), with FreeBSD
3.4 and the then-current cdrecord from ports. It may even have worked with
FreeBSD 4.2, but I'm not sure about that.
Any and all suggestions welcome,
Nadav
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21_heb2.09.0206081322001.15590-100000>