Date: Thu, 2 Sep 1999 14:41:53 -0400 (EDT) From: Kenneth Wayne Culver <culverk@wam.umd.edu> To: freebsd-current@freebsd.org Subject: current kernel breakage Message-ID: <Pine.GSO.4.10.9909021434540.16579-100000@rac7.wam.umd.edu>
next in thread | raw e-mail | index | archive | help
I recently recompiled my kernel with the following kernel config file, and now when I boot up, I get about halfway through probing, and the computer freezes, accepting no keyboard input or anything else but a hard reset (reset button) here is my kernel Config file.. # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.178 1999/07/25 04:32:43 wpaul Exp $ machine i386 cpu I686_CPU ident "MYKERNEL" maxusers 64 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options SC_DISABLE_REBOOT options SOFTUPDATES # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA controller pci0 # Floppy drives controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 controller ata0 device atadisk0 device atapicd0 # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 # Printer device plip0 # TCP/IP over parallel device ppi0 # Parallel port interface device controller vpo0 # Requires scbus and da0 # PCI Ethernet NICs. device de0 # DEC/Intel DC21x4x (``Tulip'') # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun 1 # Packet tunnel, for ppp(1) pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the legal and administrative consequences of enabling this! pseudo-device bpf 4 #Berkeley packet filter #tv card controller smbus0 controller iicbus0 controller iicbb0 device bktr0 #sound pcm0 at isa? port ? irq 5 drq 1 flags 0x0 if anyone can help, let me know. Thanks. Kenneth Culver To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.10.9909021434540.16579-100000>