Date: Mon, 11 Jul 2005 14:17:11 +0200 (MEST) From: Michiel Boland <michiel@boland.org> To: freebsd-stable@freebsd.org Subject: 5.4-RELEASE-p4: shutdown hangs after rebuiding gmirror Message-ID: <Pine.GSO.4.63.0507111358240.6372@brakkenstein.nijmegen.internl.net>
next in thread | raw e-mail | index | archive | help
Hi. I am running FreeBSD 5.4-RELEASE-p4 on a sun V20Z. It has two seagate
ST373307LC disks. The disks are mirrored with gmirror:
Name Status Components
mirror/raid1 COMPLETE da0
da1
I unplugged one of the disks, then rebooted to see if it would boot from
just the one disk. Of course there was no problem there.
I then inserted the other disk back in, followed by
camcontrol rescan all
gmirror forget raid1
gmirror insert raid1 da1
After a while the mirror was OK again. I then rebooted for a second time.
But the machine would not come up. The last lines printed on the console
were
Syncing disks, vnodes remaining...1 1 0 1 1 0 0 0 done
No buffers busy after final sync
Uptime: 55m39s
GEOM_MIRROR: Device raid1: provider mirror/raid1 destroyed.
GEOM_MIRROR: Device raid1 destroyed.
So it was stuck somewhere in the shutdown sequence between the gmirror
destruction and the "Shutting down ACPI" bit. Sending a break to the
console did not produce a DDB prompt, whereas during normal operation it
would.
I had to power-cycle to get the boot to work again.
If I leave the disks alone, rebooting does not hang the machine.
This is a bit of a nuisance. Who has any idea where to look to
troubleshoot this?
Cheers
Michiel
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.63.0507111358240.6372>