Date: Mon, 25 Feb 2013 09:32:26 -0500 (EST) From: Daniel Eischen <deischen@freebsd.org> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-current@freebsd.org Subject: Re: USB not working Message-ID: <Pine.GSO.4.64.1302250930520.11838@sea.ntplx.net> In-Reply-To: <201302251518.04798.hselasky@c2i.net> References: <Pine.GSO.4.64.1302241423150.8338@sea.ntplx.net> <201302250938.23012.hselasky@c2i.net> <Pine.GSO.4.64.1302250859110.11714@sea.ntplx.net> <201302251518.04798.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 25 Feb 2013, Hans Petter Selasky wrote: > On Monday 25 February 2013 15:01:24 Daniel Eischen wrote: >> On Mon, 25 Feb 2013, Hans Petter Selasky wrote: >>> On Sunday 24 February 2013 20:31:52 Daniel Eischen wrote: >>>> Hey, I've got a Dell Inspiron 15R Special Edition and haven't >>>> had working USB since first installing FreeBSD on it. I'm >>>> currently at r247154. >>>> >>>> When I insert a flash drive (which works fine on my desktop >>>> -current system), it is not recognized. I've tried multiple >>>> different USB drives (external HDD, flash) that all work >>>> on my desktop, but aren't recognized on me Dell notebook. >>>> This is what is in dmesg: >>>> >>>> xhci_do_command: Command timeout! >>>> usb_alloc_device: device init 2 failed (USB_ERR_TIMEOUT, ignored) >>>> ugen0.2: <Unknown> at usbus0 (disconnected) >>>> uhub_reattach_port: could not allocate new device >>>> >>>> I've got the output of a dmesg, pciconf -lv, and messages >>>> >>>> during insertion with: >>>> hw.usb.dev.debug=1 >>>> hw.usb.umass.debug=1 >>>> hw.usb.uhub.debug=1 >>>> hw.usb.ugen.debug=1 >>>> hw.usb.xhci.debug=1 >>>> >>>> here: >>>> http://people.freebsd.org/~deischen/usb/dmesg.txt >>>> http://people.freebsd.org/~deischen/usb/pciconf.txt >>>> http://people.freebsd.org/~deischen/usb/usb_flash_insertion.tx >>>> >>>> Any suggestions? >>> >>> Try to set: >>> >>> sysctl hw.usb.xhci.xhci_port_route=-1 >>> >>> In /boot/loader.conf >>> >>> I see you have a Pantherpoint chipset, and those have special port >>> routing features. >> >> Thanks, that didn't help. >> >> $ sysctl hw.usb.xhci.xhci_port_route >> hw.usb.xhci.xhci_port_route: 1 >> > > It should be minus one. Oops, that blended right in with the '='. I just tried -1 and it didn't work: $ sysctl hw.usb.xhci.xhci_port_route hw.usb.xhci.xhci_port_route: -1 Feb 25 09:28:25 rigel kernel: xhci_do_command: Command timeout! Feb 25 09:28:25 rigel kernel: usb_alloc_device: device init 2 failed (USB_ERR_TIMEOUT, ignored) Feb 25 09:28:25 rigel kernel: ugen0.2: <Unknown> at usbus0 (disconnected) Feb 25 09:28:25 rigel kernel: uhub_reattach_port: could not allocate new device Should I reboot just to start fresh? -- DE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.64.1302250930520.11838>