Date: Mon, 12 Jun 2000 07:30:15 -0700 (PDT) From: Tyler Spivey <tyler@wapvi.bc.ca> To: Kent Stewart <kstewart@3-cities.com> Cc: freebsd-questions@freebsd.org Subject: Re: sony cdu Message-ID: <Pine.LNX.4.10.10006120729250.32127-100000@viper.wapvi.bc.ca> In-Reply-To: <39445F06.D9F746A4@3-cities.com>
next in thread | previous in thread | raw e-mail | index | archive | help
i never saw a single thing about a cdrom. i dont know the port/irq/drq/flags of my sound card.. i left the port, used userconfig to set irq 5 drq 1 flags 15.. anyone know the default port? these kernels are so hard! On Sun, 11 Jun 2000, Kent Stewart wrote: > > > Tyler Spivey wrote: > > > > what are the ata lines i need? > > i have a 2x cdrom drive. > > You may have a scd CDROM. > > Have you ever looked inside or had someone look inside your computer > to see where the CDROM is hooked up? The SoundBlaster cards have a > connector on the end of the card that would be connected to your > cdrom. This is where your cdrom would be connected if it is a scd. > > I have a NEC downstairs but I don't have any idea how I would hook it > up in FreeBSD. That is where the output from "dmesg" comes in. It will > tell you if it detects the CDROM. You can also do something like > > "dmesg > cdrom.txt" > > and then include cdrom.txt in your email. That will let someone see if > you need to mount a different device when you want to use it. > > If it is really an atapi cdrom, and I don't think it is at this point, > you have to use some of > > # > # The 'ATA' driver supports all ATA and ATAPI devices. > # It can reuse the majors of wd.c for booting purposes. > # You only need one "device ata" for it to find all > # PCI ATA/ATAPI devices on modern machines. > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > > #The folliwing options are valid on the ATA driver: > # > # ATA_STATIC_ID: controller numbering is static (like the old > driver) > # else the device numbers are dynamically > allocated. > # ATA_ENABLE_ATAPI_DMA: enable DMA on ATAPI device, since many ATAPI > devices > # claim to support DMA but doesn't actually > work, this > # is not enabled as default. > > options ATA_STATIC_ID > #options ATA_ENABLE_ATAPI_DMA > > # > # For older non-PCI systems, these are the lines to use: > #device ata0 at isa? port IO_WD1 irq 14 > #device ata1 at isa? port IO_WD2 irq 15 > > > BTW, most of the SoundBlaster-16's are hooked up at > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 > > Kent > > > > > On Sun, 11 Jun 2000, Kent Stewart wrote: > > > > > > > > > > > Tyler Spivey wrote: > > > > > > > > why wont: > > > > device scd > > > > > > Is the Sony CDROM hooked up to your SoundBlaster because if it isn't > > > then you don't use the scd driver. If it is a Sony IDE, you have to > > > use an ATAPI driver. Most scd CDROM were like 1x or 2x, which is > > > really slow. > > > > > > > work to find my sony? and: > > > > device pcm > > > > device sbc0 at isa? won't detect my sb16.. whats wrong > > > > > > Crist answered this but you also need to be showing us your > > > SoundBlaster lines from a dmesg and the corresponding lines from your > > > kernel. Reply to one topic because then we don't have to keep > > > following you around. > > > > > > Kent > > -- > Kent Stewart > Richland, WA > > mailto:kstewart@3-cities.com > http://www.3-cities.com/~kstewart/index.html > FreeBSD News http://daily.daemonnews.org/ > > SETI(Search for Extraterrestrial Intelligence) @ HOME > http://setiathome.ssl.berkeley.edu/ > > Hunting Archibald Stewart, b 1802 in Ballymena, Antrim Co., NIR > http://www.3-cities.com/~kstewart/genealogy/archibald_stewart.html > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.10006120729250.32127-100000>