Date: Sun, 29 Aug 2004 01:40:33 +0200 (CEST) From: Gheorghe Ardelean <ardelean@ww.uni-erlangen.de> To: <freebsd-alpha@freebsd.org> Subject: Re: 5.3-BETA1 for Alpha available Message-ID: <Pine.LNX.4.33.0408290044080.15329-100000@servww6.ww.uni-erlangen.de>
next in thread | raw e-mail | index | archive | help
Hi Wilko,
I have at home a PWS 433au (MX5 motherboard) with TGA2 graphic
card and I have the same problem with BETA1 (fatal kernel trap while tring
to initialize the tga0 device).
I have tested also on AlphaPC64 (via serial console but with S3 Virge
DX/GX video card installed): the fatal kernel trap occurs again.
On the AlphaPC 64 the serial console is running very slowly after booting
the kernel (maybe 300bps insetad of 9600)!
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
fatal kernel trap:
trap entry = 0x3 (instruction fault)
cpuid = 0
fault type = gentrap
pc = 0xfffffc0000735b64
ra = 0xfffffc000070df5c
sp = 0xfffffc0000e09b10
usp = 0x0
curthread = 0xfffffc00008c5cc8
pid = 0, comm = swapper
[thread 0]
Stopped at Ldotrap+0x8: br zero,Lret_result <zero=0x0>
db> trace
Ldotrap() at Ldotrap+0x8
--- root of call graph ---
On AXPpci33 it dies while testing sym0. Before this sym0 reports:
sym0: <810> port 0x10100-0x101ff mem 0x81854100-0x818541ff at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
CACHE TEST FAILED: timeout.
sym0: CACHE INCORRECTLY CONFIGURED.
fatal kernel trap:
trap entry = 0x4 (unaligned access fault)
cpuid = 0
faulting va = 0xdeadc0dedeadc0de
opcode = 0x29
register = 0x1
pc = 0xfffffc0000438138
ra = 0xfffffc0000438234
sp = 0xfffffc0000e098c0
usp = 0x0
curthread = 0xfffffc00008c5cc8
pid = 0, comm = swapper
[thread 0]
Stopped at ___sym_mfree+0x58: beq t0,___sym_mfree+0x64 <t0=0x0>
db> trace
___sym_mfree() at ___sym_mfree+0x58
--- root of call graph ---
==
All this machines run without problems FreeBSD version 4.x ( 7<= x <=9 )!
Best regards,
G. Ardelean
P.S.Wilko, if you like you can add my machines to your DB:
Alpha PC64 275 MHz (at home)
AXPpci33 166MHz (at home)
PWS 433au, MX5 (at home)
AS 2100 5/250, 4way EV5, 1GB RAM (at work)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33.0408290044080.15329-100000>