Date: Tue, 17 Jun 2008 10:00:10 +0200 (CEST) From: Gheorghe Ardelean <ardelean@ww.uni-erlangen.de> To: Mark Linimon <linimon@lonesome.com> Cc: freebsd-sparc64@freebsd.org Subject: Re: status of freebsd on ultrasparc? Message-ID: <Pine.LNX.4.33.0806170958190.6152-200000@servww6.ww.uni-erlangen.de> In-Reply-To: <20080617050925.GB11727@soaustin.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Tue, 17 Jun 2008, Mark Linimon wrote: > I've now added the dmesgs from the package build cluster to the > accumulated list: > > http://wiki.freebsd.org/FreeBSD/sparc64/dmesgs Dmesg from a Blade 100 with 7.0R. Royce, you can also add it to your database. Regards, Gheorghe Ardelean. [-- Attachment #2 --] Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #2: Wed Mar 19 18:21:16 CET 2008 root@sunblade100.home.ganet:/usr/src/sys/sparc64/compile/GENERIC Timecounter "tick" frequency 502000000 Hz quality 1000 real memory = 536870912 (512 MB) avail memory = 505364480 (481 MB) cpu0: Sun Microsystems UltraSparc-IIe Processor (502.00 MHz CPU) registered firmware set <isp_1000> registered firmware set <isp_1040> registered firmware set <isp_1040_it> registered firmware set <isp_1080> registered firmware set <isp_1080_it> registered firmware set <isp_12160> registered firmware set <isp_12160_it> registered firmware set <isp_2100> registered firmware set <isp_2200> registered firmware set <isp_2300> registered firmware set <isp_2322> registered firmware set <isp_2400> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, REGOPS_FUNC) nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq 2032,2030,2031,2021 on nexus0 pcib0: Hummingbird compatible, impl 0, version 0, IGN 0x1f, bus A pcib0: [FILTER] pcib0: [FILTER] pcib0: [GIANT-LOCKED] pcib0: [ITHREAD] pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff pcib0: [FILTER] pci0: <OFW PCI bus> on pcib0 ebus0: <PCI-EBus3 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 12.0 on pci0 ebus0: <idprom>: incomplete ebus0: <flashprom> addr 0-0xfffff (no driver attached) eeprom0: <EEPROM/clock> addr 0x100000000-0x100001fff on ebus0 eeprom0: model mk48t59 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 gem0: <Sun ERI 10/100 Ethernet> mem 0x400000-0x41ffff at device 12.1 on pci0 miibus0: <MII bus> on gem0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: 2kB RX FIFO, 2kB TX FIFO gem0: Ethernet address: 00:03:ba:08:0b:a1 gem0: [ITHREAD] fwohci0: <Sun PCIO-2> mem 0x420000-0x4207ff,0x422000-0x4227ff at device 12.2 on pci0 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:03:ba:ff:fe:08:0b:a1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:03:ba:08:0b:a1 fwe0: Ethernet address: 02:03:ba:08:0b:a1 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:03:ba:ff:fe:08:0b:a1 @ 0xfffe00000000, S400, maxrec 2048 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xc1128000 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ohci0: <Sun PCIO-2 USB controller> mem 0x2000000-0x2007fff at device 12.3 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <Sun PCIO-2 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pci0: <old, non-VGA display device> at device 3.0 (no driver attached) pci0: <multimedia, audio> at device 8.0 (no driver attached) atapci0: <AcerLabs M5229 UDMA66 controller> port 0xa00-0xa07,0xa18-0xa1b,0xa10-0xa17,0xa08-0xa0b,0xa20-0xa2f at device 13.0 on pci0 atapci0: [ITHREAD] atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] machfb0: <ATI Rage XL> port 0xb00-0xbff mem 0x3000000-0x3ffffff,0x426000-0x426fff at device 19.0 on pci0 machfb0: console machfb0: 16 MB aperture at 0xd58b4000, 1 KB registers at 0x037ffc00 machfb0: 8188 KB SDRAM 114.992 MHz, maximum RAMDAC clock 230 MHz, DSP machfb0: resolution 1280x1024 at 8 bpp pcib1: <OFW PCI-PCI bridge> at device 5.0 on pci0 pci1: <OFW PCI bus> on pcib1 sym0: <875> port 0x1000-0x10ff mem 0x4000000-0x40000ff,0x4002000-0x4002fff at device 2.0 on pci1 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: [GIANT-LOCKED] sym0: [ITHREAD] syscons0: <System console> on nexus0 syscons0: Unknown <16 virtual consoles, flags=0x300> uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 on isa0 uart0: [FILTER] uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 on isa0 uart1: [FILTER] ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub0 ums0: 3 buttons and Z dir. ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.00/1.01, addr 3> on uhub0 kbd0 at ukbd0 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad0: 14594MB <Seagate ST315320A 3.21> at ata2-master UDMA66 acd0: CDRW <LTN485S/JOU2> at ata2-slave PIO4 Trying to mount root from ufs:/dev/ad0a ukbd0: at uhub0 port 4 (addr 3) disconnected ukbd0: detached ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.00/1.01, addr 3> on uhub0 kbd0 at ukbd0 gem0: link state changed to DOWN gem0: link state changed to UP ukbd0: at uhub0 port 4 (addr 3) disconnected ukbd0: detached ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.00/1.01, addr 3> on uhub0 kbd0 at ukbd0 ukbd0: at uhub0 port 4 (addr 3) disconnected ukbd0: detached ums0: at uhub0 port 2 (addr 2) disconnected ums0: detached ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub0 ums0: 3 buttons and Z dir. ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.00/1.01, addr 3> on uhub0 kbd0 at ukbd0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33.0806170958190.6152-200000>