Date: Fri, 26 Mar 2004 12:54:39 +0300 (MSK) From: gubarev@itep.ru To: freebsd-current@freebsd.org Cc: Gubarev Fedor <gubarev@itep.ru> Subject: hang/panic of 5.2.1-RELEASE installation. Message-ID: <Pine.LNX.4.58.0403261253500.4519@lattice.itep.ru>
next in thread | raw e-mail | index | archive | help
Dear all,
fresh installation of 5.2.1-RELEASE fails here with
funny symptoms which apparently was never discussed before
(at least I failed to find anything similar). Machine basically
is P4 with 1Gb RAM, ATI Radeon 9000 (laptop - see below for details).
1. With HTT enabled and almost all devices disabled (via BIOS)
I have a strictly reproducible kernel panic right after interrupts
assignment. The relevant kernel message is
"panic: interrupt from missing bus"
which seems to be from sys/i386/i386/mptable.c. The verbose boot
and panic messages are given below.
2. Without HTT and with other devices enabled machine completely hangs
just at "Mounting root from ...". Perhaps this is usual hardware
conflict although I'm not sure.
Any help will be greatly appreciated. Any additional details could
be provided immediately.....
==================================================================
1. HTT enabled, peripherals disabled. Verbose booting output follows:
------------------------------------------------------------------
SMAP type=01 base=0000000000000000 len=000000000009f400
SMAP type=02 base=000000000009f400 len=0000000000000c00
SMAP type=02 base=00000000000d0000 len=0000000000080000
SMAP type=02 base=0000000000e40000 len=000000000001c000
SMAP type=01 base=0000000000100000 len=000000003fcf0000
SMAP type=03 base=000000003fdf0000 len=000000000000b000
SMAP type=04 base=000000003fdfb000 len=0000000000005000
SMAP type=02 base=000000003fe00000 len=0000000000200000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000fff80000 len=0000000000080000
Copyright (c) 1992-2004 The FreeBSD Project
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California, All rights reserved
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:57:17 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/BOOTMFS
Preloaded elf kernel "/kernel" at 0xc0b06000
Preloaded mfs_root "/mfsroot" at 0xc0b0627c
MP Configuration Table version 1.4 found at 0xc009fc70
APIC: Using MPTable enumerator
SMP: Added CPU 0 (BSP)
MPTable: < SiS 645DX >
Calibating clock(s) ... i8254 clock: 1193169 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3066793172 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3066.79-MHz 686-class CPU)
Origin="GenuineIntel" Id=0xf29 Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1071579136 (1021 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000003ebd2fff, 1039835136 bytes (253866 pages)
avail memory = 1031491584 (983 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f72a0
bios32: Entry = 0xfd890 (c00fd890) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd890+0x138
pnpbios: Found PnP BIOS data at 0xc00f7300
pnpbios: Entry = f0000:9ba1 Rev = 1.0
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 16 -> irq 16 (edge, activelo)
ioapic0: intpin 17 -> irq 17 (edge, activelo)
ioapic0: intpin 18 -> irq 18 (edge, activelo)
ioapic0: intpin 19 -> irq 19 (edge, activelo)
ioapic0: intpin 20 -> irq 20 (edge, activelo)
ioapic0: intpin 21 -> irq 21 (edge, activelo)
ioapic0: intpin 22 -> irq 22 (edge, activelo)
ioapic0: intpin 23 -> irq 23 (edge, activelo)
panic: interrupt from missing bus
cpuid = 0;
Uptime: 1s
WARNING: Driver mistake: make_dev(geom.ctl) called before SI_SUB_DRIVERS
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x38
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc0536ef0
stack pointer = 0x10:0xc0c21cb0
frame pointer = 0x10:0xc0c21cb4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
........
======================================================================
2. HTT disabled, peripherals enabled. Verbose booting output (machine
freezes at "Mounting root from ..." below):
----------------------------------------------------------------------
Copyright (c) 1992-2004 The FreeBSD Project
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California, All rights reserved
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:57:17 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/BOOTMFS
Preloaded elf kernel "/kernel" at 0xc0b06000
Preloaded mfs_root "/mfsroot" at 0xc0b0627c
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3066.79-MHz 686-class CPU)
Origin="GenuineIntel" Id=0xf29 Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1071579136 (1021 MB)
avail memory = 1031491584 (983 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf50
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:2 INTB BIOS irq 9
pci_cfgintr: 0:3 INTA BIOS irq 11
pci_cfgintr: 0:3 INTB BIOS irq 9
pci_cfgintr: 0:3 INTC BIOS irq 9
pci_cfgintr: 0:10 INTA BIOS irq 11
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 0:1 INTA routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, FireWire> at device 2.3 (no driver attached)
atapci0: <SiS 962/963 UDMA133 controller> port 0x1000-0x100f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.5 on pci0
ata0: at 0x1f0 irq 14 at atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <simple comms> at device 2.6 (no driver attached)
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xec001000-0xec001fff irq 11 at device 3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xec002000-0xec002fff irq 9 at device 3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xec003000-0xec003fff irq 9 at device 3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 3.3 (no driver attached)
pci0: <network, ethernet> at device 10.0 (no driver attached)
cbb0: <ENE CB1410 PCI-CardBus Bridge> at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:12 INTA routed to irq 5
cbb0: [MPSAFE]
eisa0: <eisa bus> on motherboard
eisa0: unknown card @@@224c (0x0000224c) at slot 1
orm0: <Option ROMs> at mem 0xd0000-0xd5fff,0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <@@@0000> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
ppc1: parallel port not found
Timecounter "TSC" frequency 3066790480 Hz quality 800
Timecounters tick every 10.000 msec
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc06cc520
GEOM: create disk ad0 dp=0xc69a6660
ad0: 57231MB <TOSHIBA MK6021GAS> [116280/16/63] at ata0-master UDMA100
acd0: CDRW <Slimtype COMBO LSC-24081> at ata1-master PIO4
Mounting root from ufs:/dev/md0
-----------------------------------------------------------------------
BTW, in the verbose mode the last line becomes:
-----------------------------------------------------------------------
Mounting root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
-----------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.58.0403261253500.4519>