Date: Fri, 12 Jul 2002 01:44:25 -0400 (EDT) From: "Andrew R. Reiter" <arr@watson.org> To: Thomas Moestl <tmoestl@gmx.net> Cc: freebsd-sparc64@FreeBSD.org Subject: Re: hme0 -- 0x20000 error (no rx descs) Message-ID: <Pine.NEB.3.96L.1020712014200.86899C-100000@fledge.watson.org> In-Reply-To: <20020711165803.GB318@crow.dom2ip.de>
next in thread | previous in thread | raw e-mail | index | archive | help
[snip, see other thread messages for context.] : :Hmmm, actually, I think that the kernel on the ISO was compiled with :KTR, so you just need to set the mask (no recompile required), using :either a loader tunable ("set debug.ktr.mask=0x2000000" on the loader :prompt) or sysctl ("sysctl debug.ktr.mask=0x2000000"). Since it :doesn't seem to happen during boot the sysctl method should suffice. : : - thomas Here's the related traces; please let me know if you need more context or other information. index trace ------ ----- 5186 hme_intr: status 0x20001 5185 hme_intr: status 0x20001 5184 hme_intr: status 0x20001 5183 hme_intr: status 0x20001 5182 hme_intr: status 0x20101 5181 hme_tint: not busy! 5180 hme_tint: not owned, dflags 0x1 5179 hme_tint: index 3, flags 0x20000018 5178 hme_tint: not owned, dflags 0x1 5177 hme_tint: index 2, flags 0x8 5176 hme_tint: not owned, dflags 0x1 5175 hme_tint: index 1, flags 0x40000036 5174 hme_intr: status 0x3000000 5173 hme_load_mbuf: activating ri 1, si 1 (0xc0000036) 5172 hme_load_mbuf: activating ri 2, si 1 (0x80000008) 5171 hme_load_mbuf: activating ri 3, si 1 (0xa0000018) 5170 hme_load_mbuf: next desc is 4 (0) 5169 hme_txdma_callback: seg 1/1, ri 3, flags 0x20000018, addr 0xfe215d20 5168 hme_txdma_callback: seg 1/1, ri 2, flags 0x8, addr 0xfe211f20 5167 hme_txdma_callback: seg 1/1, ri 1, flags 0x40000036, addr 0xfe20deca 5166 hme_intr: status 0x20101 5165 hme_tint: not busy! 5164 hme_tint: not owned, dflags 0x1 5163 hme_tint: index 0, flags 0x6000004e 5162 hme_intr: status 0x3000000 5161 hme_load_mbuf: activating ri 0, si 0 (0xe000004e) 5160 hme_load_mbuf: next desc is 1 (0) 5159 hme_txdma_callback: seg 1/1, ri 0, flags 0x6000004e, addr 0xfe209e4a 5158 hme_intr: status 0 5157 hme_init: mac rxcfg 0x801, maci txcfg 0x401 5156 hme_init: intr mask 0xf95d, erx cfg 0x411, etx cfg 0x3ff 5155 hme_init: tx ring 0xfe000000, rsz 0x3, rx ring 0xfe000800, rxsize 0x5ee 5154 hme_init: programming TX_MAC to 401 5153 hme_init: programming RX_MAC to 801 5152 hme_init: programming XIF to 141 5151 hme_init: programming ERX_CFG to 411 5150 tx entry 1: flags 0, address 0 5149 rx entry 1: flags ee953c00, address 5820fe 5148 gem_meminit: rx ring va 0xc4124800, pa 0xfe000800 5147 gem_meminit: tx ring va 0xc4124000, pa 0xfe000000 5146 hme_load_mbuf: activating ri 0, si 0 (0xe000002a) 5145 hme_load_mbuf: next desc is 1 (0) 5144 hme_txdma_callback: seg 1/1, ri 0, flags 0x6000002a, addr 0xfe209fd2 5143 hme_init: mac rxcfg 0x801, maci txcfg 0x401 5142 hme_init: intr mask 0xf95d, erx cfg 0x411, etx cfg 0x3ff 5141 hme_init: tx ring 0xfe000000, rsz 0x3, rx ring 0xfe000800, rxsize 0x5ee 5140 hme_init: programming TX_MAC to 401 5139 hme_init: programming RX_MAC to 801 5138 hme_init: programming XIF to 141 5137 hme_init: programming ERX_CFG to 411 5136 tx entry 1: flags 0, address 0 5135 rx entry 1: flags 4086, address 5820fe -- Andrew R. Reiter arr@watson.org arr@FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.3.96L.1020712014200.86899C-100000>