Date: Tue, 25 Feb 2003 14:55:10 -0700 (US Mountain Standard Time) From: Steve Grandi <grandi@noao.edu> To: freebsd-scsi@freebsd.org Subject: Troubles with Adaptec 7902 Ultra320 controller Message-ID: <Pine.WNT.4.53.0302251421260.2248@rigel>
next in thread | raw e-mail | index | archive | help
I've been trying to bring up Stable on a Supermicro X5DPR-8G2+ motherboard which features an integrated Adaptec AIC-7902 dual channel Ultra 320 controller. Three disks are present, all on the A channel. 4.7-Release blows up badly on this hardware (starting with "ahd0: WARNING - Failed chip reset! Trying to initialize anyway). When I try and boot a snapshot of Stable from 24 February 2003, I get a dump from the B side of the controller followed by a hang when the disks are being probed. When I boot 5.0-RELEASE from the distribution ISO image, everything works fine. Since I don't really want to run 5.0 on this machine in production, can anyone give me a clue as to how I can get it running under Stable? any other information I can provide? I hate to contemplate copping out and disabling the on-board controller and sticking in a 29160 in a PCI slot. console outputs from the 4.8-Prerelease and 5.0-Release boots follow. Steve Grandi ------------------------------------------------------------------------------ FreeBSD 4.8-20030224-PRERELEASE #0: Mon Feb 24 08:29:11 GMT 2003 root@triangle.rtp.FreeBSD.Org:/usr/obj/usr/src/sys/BOOTMFS Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2399329660 Hz CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2146959360 (2096640K bytes) avail memory = 2083483648 (2034652K bytes) Preloaded elf kernel "kernel" at 0xc0823000. Preloaded mfs_root "/mfsroot" at 0xc0823084. Pentium Pro MTRR support enabled md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03e9d54 md1: Malloc disk Using $PIR table, 24 entries at 0xc00fde40 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 pci2: <PCI bus> on pcib2 pci2: <unknown card> (vendor=0x8086, dev=0x1010) at 3.0 irq 5 pci2: <unknown card> (vendor=0x8086, dev=0x1010) at 3.1 irq 5 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 pci3: <PCI bus> on pcib3 ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfc300000-0xfc301fff irq 5 at device 2.0 on pci3 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc302000-0xfc303fff irq 5 at device 2.1 on pci3 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 10 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f irq 7 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci4: <PCI bus> on pcib4 pci4: <ATI Mach64-GR graphics accelerator> at 1.0 irq 11 isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xfc000000-0xfc0003ff irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0 eisa0: <EISA bus> on motherboard eisa0: unknown card @@@0000 (0x00000000) at slot 4 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. ahd1: PCI error Interrupt >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahd1: Dumping Card State at program address 0x2c Mode 0x11 Card was paused HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0] DFFSTAT[0x30] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x10] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 qinstart = 0 qinfifonext = 0 QINFIFO: WAITING_TID_QUEUES: Pending list: Total 0 Kernel Free SCB list: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0, LJSCB 0xff00 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0, LJSCB 0xff00 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 SIMODE0[0x6c] CCSCBCTL[0x0] ahd1: REG0 == 0xf87d, SINDEX = 0x11, DINDEX = 0x0 ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 0 0 0 0 0 STACK: 0xf 0x8 0x7 0x6 0x5 0x4 0x3 0x2b <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> ahd1: Signaled Target Abort acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle Copied 18 bytes of sense data offset 12: 0x70 0x0 0x0 0x40 0x0 0x8 0x99 0xa 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 (ahd0:A:2:1): refuses synchronous negotiation. Using asynchronous transfers followed by nothing... ------------------------------------------------------------------------------- FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003 root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0aab000. Preloaded mfs_root "/boot/mfsroot" at 0xc0aab0a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0aab0ec. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2399328296 Hz CPU: Pentium 4 (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xffffffffbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,<b31>> real memory = 2146959360 (2047 MB) avail memory = 2078740480 (1982 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc062679c npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 Using $PIR table, 24 entries at 0xc00fde40 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.HLB_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.7> port 0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 5 at device 3.0 on pci2 em0: Speed:1000 Mbps Duplex:Full em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.7> port 0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 5 at device 3.1 on pci2 em1: Speed:N/A Duplex:N/A pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1 pci3: <ACPI PCI bus> on pcib3 ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x44ff mem 0xfc300000-0xfc301fff irq 5 at device 2.0 on pci3 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc302000-0xfc303fff irq 5 at device 2.1 on pci3 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 10 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f irq 7 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xfc000000-0xfc0003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdc000-0xdffff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle (probe2:ahd0:0:2:0): Now packetized. (probe1:ahd0:0:1:0): Now packetized. (probe0:ahd0:0:0:0): Now packetized. ses0 at ahd0 bus 0 target 6 lun 0 ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device da0 at ahd0 bus 0 target 0 lun 0 da0: <SEAGATE ST336607LC 0004> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da1 at ahd0 bus 0 target 1 lun 0 da1: <SEAGATE ST336607LC 0004> Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) da2 at ahd0 bus 0 target 2 lun 0 da2: <SEAGATE ST373307LC 0004> Fixed Direct Access SCSI-3 device da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) Mounting root from ufs:/dev/md0 /stand/sysinstall running as init on serial console -- Steve Grandi National Optical Astronomy Observatory/AURA Inc., Tucson AZ USA Internet: grandi@noao.edu Voice: +1 520 318-8228 FAX: +1 520 318-8360 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.WNT.4.53.0302251421260.2248>