Date: Mon, 13 Mar 2000 22:09:11 +0100 From: Anne Marcel Roorda <marcel@eu.uu.net> To: Jesper Skriver <jesper@skriver.dk> Cc: Morten Seeberg <ml@seeberg.dk>, mobile@freebsd.org Subject: Re: pcm driver on Thinkpad 600E (2645) Message-ID: <QQigjs11040.200003132109@anocserve1.ams.ops.eu.uu.net> In-Reply-To: Your message of "Mon, 13 Mar 2000 21:42:55 %2B0100." <20000313214255.B52797@skriver.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 13, 2000 at 11:20:58AM +0100, Anne Marcel Roorda wrote: > > Hi, I have a subj. I probably just overlooked something very simple, but I > havent been able to make my soundcard work. > > Im running CURRENT RC3, and since the new pcm driver seems to detect > everything just fine, I dont think this is a CURRENT problem. > > Basicly I just added: > device pcm > to my kernel file, and this is what dmesg shows: > > csa0: <Crystal Semiconductor CS4610/4611 Audio accelerator> mem > 0x50000000-0x500fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0 > pcm0: <CS461x PCM Audio> on csa0 > pcm0: ac97 codec reports dac not ready > > Hi, > > Adding "options PNPBIOS" to the kernel config should get this > working. > > From a working TP600E: > > csa0: <Crystal Semiconductor CS4610/4611 Audio accelerator> mem 0x50000000- 0x500fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0 > pcm0: <CS423x-PCI> at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 5 drq 1, 0 on isa0 This got my sound working, but now ep0 (a 3c589c) doesn't work, it complains like ep0: No irq?! It works find when I remove PNPBIOS again, any ideas ? Hi, Yes, a few :) I'm assuming that you're using the PCMCIA version. If you check the list of available IRQ's, then you'll probably find one that's in use already listed there. I'm including the pccard.conf file as I'm currently using it, stripped so it only contains things that I actually use, and all cards configured to allow me to mix and match as I need them. - marcel # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 9 10 # Available memory slots memory 0xd4000 96k # 3Com Etherlink III 3C589B, 3C589C card "3Com Corporation" "3C589" config 0x1 "ep0" ? insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 -link0 link1 # insert /etc/pccard_ether ep0 link0 -link1 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete # 3Com Etherlink III 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep0" ? insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete card "3Com" "Megahertz 574B" config 0x1 "ep0" ? insert echo 3Com Fast Etherlink 547B inserted remove echo 3Com Fast Etherlink 547B removed card "DYNALINK" "L10C" config 0x21 "ed0" ? insert echo Dynalink L10C inserted remove echo Dynalink L10C removed card "PCC" "336-03" config 0x4 "sio1" ? insert echo Modem inserted remove echo Modem removed card "ROCKWELL" "V.34+ Fax Modem" config 0x22 "sio1" ? insert echo Modem inserted remove echo Modem removed card "Megahertz" "XJ4336-CC4336" config 0x22 "sio1" ? insert echo Modem inserted remove echo Modem removed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?QQigjs11040.200003132109>