Date: Tue, 31 Jan 2012 21:00:58 -0500 From: Shant Kassardjian <shant@skylab.ca> To: <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org Subject: RE: SR71-A (AR9160) no longer detected in FreeBSD 9 Message-ID: <SNT128-W49D0A34C832C7E41EEB15ADC730@phx.gbl> In-Reply-To: <SNT128-W62ADCF51E271B04A4CA1E0DC720@phx.gbl> References: <SNT128-W597CCDA08508FF395508F1DC720@phx.gbl>, <CAJ-VmokRH9YyGftfGj-eC=yQaAZ2sZ8sC=U4NgwD3%2B%2BWnZ_FLg@mail.gmail.com>, <SNT128-W99EE0AA99E4BEE8AB3683DC720@phx.gbl>, <CAJ-Vmo==4EVcbzHm_eZYafRAP1EdFk-ub%2BY4DGn4OBJ_b5yGDQ@mail.gmail.com>, <SNT128-W14C978FA4833CE3F0B1552DC720@phx.gbl>, <CAJ-Vmo=yLdcOD-h%2Bxrgd6V3cT8gaQDCscLi%2B-KmHi=Yz268i6Q@mail.gmail.com>, <SNT128-W62ADCF51E271B04A4CA1E0DC720@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Adrian=2C
After recompiling the kernel with device ath_pci=2C atheros got redetected=
=2C however 802.11n seems to not be working with the following errors:
ifconfig wlan0 destroy
ifconfig wlan0 create wlandev ath0 wlanmode hostap
wlan0: Ethernet address: 00:15:6d:84:70:d5
core# ath0: unable to reset hardware=3B hal status 14 =20
core# ifconfig wlan0 channel 6:ht/40 =
=20
ifconfig: SIOCS80211: Invalid argument
core# ifconfig wlan0 172.25.2.1 ssid test mode 11n channel 6:ht/40 -ampdutx=
~
ifconfig: SIOCS80211: Invalid argument
core# ath0: stuck beacon=3B resetting (bmiss count 4)
I tried adding the following in /etc/rc.conf:
wlans_ath0=3D"wlan0"
create_args_wlan0=3D"wlanmode hostap"
ifconfig_wlan0=3D"inet 172.25.2.1 netmask 255.255.255.224 ssid test mode 11=
na channel 6:ht/40 txpower 5 -ampdutx mac:allow"
ifconfig shows the following=2C still can't force it to do N.
wlan0: flags=3D8843<UP=2CBROADCAST=2CRUNNING=2CSIMPLEX=2CMULTICAST> metric =
0 mtu 1500
ether 00:15:6d:84:70:d5
nd6 options=3D1<PERFORMNUD>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11na <hostap>
status: running
ssid test channel 52 (5260 MHz 11a ht/40+) bssid 00:15:6d:84:70:d5
country US ecm authmode OPEN privacy OFF txpower 23 mcastrate 6
mgmtrate 6 scanvalid 60 ampdulimit 64k ampdudensity 8 shortgi wme
burst dtimperiod 1 -dfs
here is my dmesg for atheros:
ath0: <Atheros 9160> mem 0xfe6f0000-0xfe6fffff irq 19 at device 15.0 on pci=
1
ath0: [HT] enabling HT modes
ath0: [HT] 2 RX streams=3B 2 TX streams
ath0: AR9160 mac 64.0 RF5133 phy 11.0
wlan0: flags=3D8843<UP=2CBROADCAST=2CRUNNING=2CSIMPLEX=2CMULTICAST> metric =
0 mtu 1500
ether 00:15:6d:84:70:d5
nd6 options=3D1<PERFORMNUD>
media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (autoselec=
t <hostap>)
status: no carrier
ssid test channel 161 (5805 MHz 11a)
country US ecm authmode OPEN privacy OFF txpower 30 mcastrate 6
mgmtrate 6 scanvalid 60 wme burst dtimperiod 1 -dfs
core# ifconfig wlan0 inet 172.25.2.1 netmask 255.255.255.248 mode 11n ssid =
test channel 6:ht/40
ifconfig: SIOCSIFMEDIA (media): Device not configured
core# ath0: stuck beacon=3B resetting (bmiss count 4) =
~
ath0: stuck beacon=3B resetting (bmiss count 0)
If you need more information just let me know=2C I'd be glad to help out.
Regards=2C
Shant K.
From: shant@skylab.ca
To: adrian@freebsd.org
CC: freebsd-wireless@freebsd.org
Subject: RE: SR71-A (AR9160) no longer detected in FreeBSD 9
Date: Mon=2C 30 Jan 2012 21:28:43 -0500
Just to make sure I got everything right:
ifconfig_wlan0=3D"inet 172.25.2.1 netmask 255.255.255.224 ssid test mode 11=
na channel 64:ht/40 txpower 5 -ampdutx mac:allow"
does this look right to you?
I would like to run 802.11n only @ 5ghz frequencies...
Date: Mon=2C 30 Jan 2012 18:19:50 -0800
Subject: Re: SR71-A (AR9160) no longer detected in FreeBSD 9
From: adrian@freebsd.org
To: shant@skylab.ca
CC: freebsd-wireless@freebsd.org
ifconfig wlanX -ampdutx
Adrian
On 30 January 2012 18:17=2C Shant Kassardjian <shant@skylab.ca> wrote:
I can not find any documentation on how to disable ampdutx=2C is it a comma=
nd or a patch that I need to apply? I would be willing to test out.
Date: Mon=2C 30 Jan 2012 18:12:40 -0800
Subject: Re: SR71-A (AR9160) no longer detected in FreeBSD 9
From: adrian@freebsd.org
To: shant@skylab.ca
CC: freebsd-wireless@freebsd.org
Yes=2C it will support that.
Please note - 802.11n TX is not gonig to work in 9.0 - you have to disable =
ampdutx.
Adrian
On 30 January 2012 18:03=2C Shant Kassardjian <shant@skylab.ca> wrote:
Hi Adrian=2C
I can't believe I forgot to include that! weird that it was working without=
it in 8.2!
I added back: options ATH_ENABLE_11N and device ath_pci and r=
ecompiling! :)
btw=2C do you know if AR9160 can support multiple SSIDs in hostap mode? Exa=
mple=2C I would like to create one 802.11a SSID network and another 802.11n=
or 802.11g network...
Shant K.
Date: Mon=2C 30 Jan 2012 17:51:05 -0800
Subject: Re: SR71-A (AR9160) no longer detected in FreeBSD 9
From: adrian@freebsd.org
To: shant@skylab.ca
CC: freebsd-wireless@freebsd.org
Hi=2C
Try including the ath_pci device in your kernel config file.
Sorry about that! :)
Adrian
=20
=20
=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?SNT128-W49D0A34C832C7E41EEB15ADC730>