Date: Tue, 26 Oct 1999 18:54:19 -0400 (EDT) From: "Alexander N. Kabaev" <ak03@gte.com> To: freebsd-current@freebsd.org Subject: intpm0: Could not allocate Bus space Message-ID: <XFMail.991026185419.ak03@gte.com>
next in thread | raw e-mail | index | archive | help
Current (cvsupped and build today) fails to attach to the intpm0 device. The
following is my dmesg message:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Tue Oct 26 11:31:29 EDT 1999
root@kanpc.gte.com:/usr/src/sys/compile/KANPC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (398.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 126738432 (123768K bytes)
Preloaded elf kernel "kernel" at 0xc0334000.
Preloaded elf module "splash_bmp.ko" at 0xc033409c.
Preloaded elf module "vesa.ko" at 0xc0334140.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc03341dc.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0321102 (1000022)
VESA: STB Velocity 128 (RIVA 128)
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <NVidia Riva128 graphics accelerator> irq 11 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> at device 7.3 on pci0
intpm0: Could not allocate Bus space
device_probe_and_attach: intpm0 attach returned 6
xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:10:4b:94:9f:5c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: unknown card (vendor=0x12eb, dev=0x0001) at 14.0 irq 10
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
pca0 at port 0x40 on isa0
pca0: PC speaker audio driver
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
pcm0: <SB16 PnP> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on
isa0
unknown0: <Reserved> at port 0x100 on isa0
unknown1: <Reserved> at port 0x108 on isa0
unknown2: <Game> at port 0x200-0x207 on isa0
unknown3: <U.S.Robotics x2 Winmodem Voice> at port 0x109-0x110 irq 3 on isa0
ds0 XXX: driver didn't set ifq_maxlen
ad0: <IBM-DTTA-351680/T51OA70B> ATA-4 disk at ata0 as master
ad0: 16124MB (33022080 sectors), 32760 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 31 depth queue, UDMA33
Creating DISK ad0
Creating DISK wd0
acd0: <NEC CD-ROM DRIVE:28B/3.05> CDROM drive at ata1 as master
acd0: read 2412KB/s (5512KB/s), 256KB buffer, DMA
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
changing root device to wd0s2a
WARNING: driver snd should register devices with make_dev() (dev_t = "#snd/3")
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.991026185419.ak03>