Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 7 Jan 2024 13:02:00 +0000
From:      void <void@f-m.fm>
To:        freebsd-arm@freebsd.org
Subject:   current for arm64 tries tftp first for some reason
Message-ID:  <ZZqgyHIJhgNoHtES@int21h>

next in thread | raw e-mail | index | archive | help
In FreeBSD-15.0-CURRENT-arm64-aarch64-RPI-20240104-8bf0882e186e-267378.img of
2024-01-04, when booting, the u-boot stage firstly looks for tftp. 
How can this be turned off? is it an issue that I need to raise
directly with u-boot? I've only seen this behaviour before
when there's been no bootable (microsd or usb3) media available.
Now it seems tftp is tried first then usb3 and not the other
way around.

If I'm not available at the console to ctrl-c multiple times, it would
take ages to eventually(?) boot to usb3. Each line where it says
'Abort' is there I've had to manually ctrl-c

###########

U-Boot 2023.10 (Jan 04 2024 - 05:11:11 +0000)

DRAM:  998 MiB (effective 7.9 GiB)
RPI 4 Model B (0xd03114)
Core:  210 devices, 16 uclasses, devicetree: board
MMC:   mmc@7e300000: 3, mmc@7e340000: 0
Loading Environment from FAT... ** Bad device specification mmc 1 **
In:    serial,usbkbd
Out:   serial,vidconsole
Err:   serial,vidconsole
Net:   eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 4 USB Device(s) found
        scanning usb for storage devices... 1 Storage Device(s) found
        Hit any key to stop autoboot:  0 
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_send_command: MMC: 3 busy timeout increasing to: 200 ms.
        sdhci_send_command: MMC: 3 busy timeout increasing to: 400 ms.
        sdhci_send_command: MMC: 3 busy timeout increasing to: 800 ms.
        sdhci_send_command: MMC: 3 busy timeout increasing to: 1600 ms.
        sdhci_send_command: MMC: 3 busy timeout increasing to: 3200 ms.
        sdhci_send_command: MMC: 3 busy timeout.
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_send_command: MMC: 3 busy timeout.
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_send_command: MMC: 3 busy timeout.
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_send_command: MMC: 3 busy timeout.
        Card did not respond to voltage select! : -110
        BOOTP broadcast 1
        DHCP client bound to address 192.168.1.81 (3 ms)
        *** Warning: no boot file name; using 'C0A80151.img'
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'C0A80151.img'.
        Load address: 0x80000
        Loading: T 
        Abort
        missing environment variable: pxeuuid
        Retrieving file: pxelinux.cfg/01-dc-a6-32-e2-48-fc
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/01-dc-a6-32-e2-48-fc'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C0A80151
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C0A80151'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C0A8015
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C0A8015'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C0A801
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C0A801'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C0A80
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C0A80'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C0A8
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C0A8'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C0A
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C0A'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C0
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C0'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/C
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/C'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/default-arm-bcm283x-rpi
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/default-arm-bcm283x-rpi'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/default-arm-bcm283x
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/default-arm-bcm283x'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/default-arm
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/default-arm'.
        Load address: 0x2500000
        Loading: *
        Abort
        Retrieving file: pxelinux.cfg/default
        Using ethernet@7d580000 device
        TFTP from server 192.168.1.1; our IP address is 192.168.1.81
        Filename 'pxelinux.cfg/default'.
        Load address: 0x2500000
        Loading: *
        Abort
        ** Booting bootflow 'usb_mass_storage.lun0.bootdev.part_1' with efi
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_set_clock: Timeout to wait cmd & data inhibit
        sdhci_send_command: MMC: 3 busy timeout.
        Card did not respond to voltage select! : -110
        No EFI system partition
        No EFI system partition
        Failed to persist EFI variables
        Booting /efi\boot\bootaa64.efi

-- 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ZZqgyHIJhgNoHtES>