Date: Sat, 22 Jun 2024 16:23:44 +0100 From: void <void@f-m.fm> To: freebsd-fs@freebsd.org Subject: setting currdev correctly after repartitioning Message-ID: <ZnbsgLFBVRtzycPU@int21h>
next in thread | raw e-mail | index | archive | help
I've imaged with dd an rpi4 ssd and created on the hardware
4*8GB swap partitions, and have transferred with cpdup the
freebsd contents from the image back to the ssd. The msdos-based
EFI and rpi partition was unmodified.
When I try to boot, it drops an OK prompt with the following error
"Setting currdev to disk0p2:
ERROR: cannot open /boot/lua/loader.lua: no such file or directory."
The partition table looks like this
# gpart show da5 (this is da5 on another machine)
=> 63 1953525105 da5 MBR (932G)
63 1 - free - (512B)
64 524288 1 fat32lba [active] (256M)
524352 1952448512 2 freebsd (931G)
1952972864 552304 - free - (270M)
# gpart show da5s2
=> 0 1952448512 da5s2 BSD (931G)
0 16777216 1 freebsd-swap (8.0G)
16777216 16777216 2 freebsd-swap (8.0G)
33554432 16777216 4 freebsd-swap (8.0G)
50331648 16777216 5 freebsd-swap (8.0G)
67108864 1885339648 6 freebsd-ufs (899G)
I wonder if freebsd-ufs needs to be the first slice?
Is that what the error means? if not, how can I tell it
that the loader is on (when it's installed on the rpi4) /dev/da5s2f ?
it's not in fstab. context is -current and ufs2.
fstab looks like this
# Custom /etc/fstab for FreeBSD embedded images
/dev/ufs/rootfs / ufs rw,noatime 1 1
/dev/msdosfs/EFI /boot/efi msdosfs rw,noatime 0 0
tmpfs /tmp tmpfs rw,mode=1777 0 0
#
#/dev/label/growfs_swap none swap sw 0 0
#md none swap sw,late,file=/usr/swap0 0 0
--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ZnbsgLFBVRtzycPU>