Date: Wed, 25 Oct 2017 17:10:03 -0400 From: Mike Tancsa <mike@sentex.net> To: FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: Re: ppp routing bug ? Message-ID: <a23ed8b3-1050-12d5-6a7c-1a1a0c174251@sentex.net> In-Reply-To: <bdb4d277-40ca-5a8e-f0e0-c1734a0c88c6@sentex.net> References: <bdb4d277-40ca-5a8e-f0e0-c1734a0c88c6@sentex.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/25/2017 4:54 PM, Mike Tancsa wrote: > While testing out our nanobsd RELENG11 images, I noticed a strange > routing issue. Using a standard pppoe config that has been working fine > on RELENG8,9,10 I am getting bogus routing entries. > having the commands in ppp.linkup > > pppoe: > add 192.168.134.2/32 HISADDR > add 192.168.134.3/32 HISADDR > add 192.168.134.4/32 HISADDR > add 192.168.134.5/32 HISADDR Upping the logs with debug ppp[60212]: tun0: Command: pppoe: add 192.168.134.2/32 HISADDR ppp[60212]: tun0: Debug: wrote 124: cmd = Add, dst = 192.168.134.2, gateway = 64.7.128.7 The gateway is correct. Seems right, but its not installing it right. It also borkes on the ipv6 addr which I have disabled ppp[60212]: tun0: Warning: ff02::: Change route failed: errno: Value too large to be stored in data type ppp[60212]: tun0: Debug: deflink: DescriptorRead: read 14/2048 from 1 ppp[60212]: tun0: Debug: proto_LayerPull: unknown -> 0xc021 ppp[60212]: tun0: Debug: link_PullPacket: Despatch proto 0xc021 Any ideas ? ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a23ed8b3-1050-12d5-6a7c-1a1a0c174251>