Date: Sat, 7 Jul 2007 20:25:20 -0400 From: "Xiaofan Chen" <xiaofanc@gmail.com> To: "Hans Petter Selasky" <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: libusb usb_interrupt_read hangs under FreeBSD Message-ID: <a276da400707071725x2b2b8ab3ife6c5459d06042bd@mail.gmail.com> In-Reply-To: <200707051724.30175.hselasky@c2i.net> References: <a276da400704030427g6fcfdc37u43bdf0fd1cd69ea8@mail.gmail.com> <a276da400704040434y6451900eg95e3cd2f35cae593@mail.gmail.com> <a276da400707041005k636319bax582c018c46da00ef@mail.gmail.com> <200707051724.30175.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 7/5/07, Hans Petter Selasky <hselasky@c2i.net> wrote:
> > > > The chip does not handle a clear-stall request on the control pipe to
> > > > clear-stall on the interrupt pipe. The result is that the interrupt
> > > > pipe stops, or at least all buffers are cleared.
> > > >
The following is part of the usb firmware from Micrcohip.
Somehow it masks EP0 in the handler to SET & CLEAR FEATURES
requesrs. Is this the problem?
if((SetupPkt.bFeature == ENDPOINT_HALT)&&
(SetupPkt.Recipient == RCPT_EP)&&
(SetupPkt.EPNum != 0))
/******************************************************************************
* Function: void USBStdFeatureReqHandler(void)
*
* PreCondition: None
*
* Input: None
*
* Output: None
*
* Side Effects: None
*
* Overview: This routine handles the standard SET & CLEAR FEATURES
* requests
*
* Note: None
*****************************************************************************/
void USBStdFeatureReqHandler(void)
{
if((SetupPkt.bFeature == DEVICE_REMOTE_WAKEUP)&&
(SetupPkt.Recipient == RCPT_DEV))
{
ctrl_trf_session_owner = MUID_USB9;
if(SetupPkt.bRequest == SET_FEATURE)
usb_stat.RemoteWakeup = 1;
else
usb_stat.RemoteWakeup = 0;
}//end if
if((SetupPkt.bFeature == ENDPOINT_HALT)&&
(SetupPkt.Recipient == RCPT_EP)&&
(SetupPkt.EPNum != 0))
{
ctrl_trf_session_owner = MUID_USB9;
/* Must do address calculation here */
pDst.bRam = (byte*)&ep0Bo+(SetupPkt.EPNum*8)+(SetupPkt.EPDir*4);
if(SetupPkt.bRequest == SET_FEATURE)
*pDst.bRam = _USIE|_BSTALL;
else
{
if(SetupPkt.EPDir == 1) // IN
*pDst.bRam = _UCPU;
else
*pDst.bRam = _USIE|_DAT0|_DTSEN;
}//end if
}//end if
}//end USBStdFeatureReqHandler
Regards,
Xiaofan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a276da400707071725x2b2b8ab3ife6c5459d06042bd>