Date: Sun, 19 Nov 2006 12:10:52 -0800 From: jekillen <jekillen@prodigy.net> To: freebsd-amd64@freebsd.org Subject: System panic during boot from install cd Message-ID: <aff99a5941d68bc5351927a9552d3534@prodigy.net>
next in thread | raw e-mail | index | archive | help
Hello knowledgeable People; Perhaps you can give me some advice with this problem: I have just finished assembling a new machine that uses: MSI RX480 Neo2 motherboard w/ realtek ethernet chip builtin. AMD64 socket 939 3500+ processor. When attempting to boot from the FreeBSD v6.0 install cd the process is aborted with the following messages: re0 ehternet address 00:13:d3;a5:ad:89 re0 diagnostic failed received short packet re0 attach aborted due to hardware diag failure kernel trap 12 with interrupts disabled fatal trap 12 page fault while in kernel mode fault virtual address =0x74 fault code =supervisor read, page not present instruction pointer =0x20:0xc0657d4d stack pointer =0x28:0xc1020958 frame pointer =0x28:0xc102095c code segment =base 0x0, limit 0xfffff, type 0x1b, DPL 0, pres 1, def 321, gran 1 processor flags =resume, 0IPL=0 current process 0 (swapper) trap number 12 panic page fault uptime 1s Additional info Have only a ata cdrom drive on ide bus Have an sata drive I intend to use as boot drive have two SCSI drives intended for /var and /usr file systems I have one other machine with AMD64 socket 754 - different motherboard No installation problems And another machine with AMD64 socket 939 with nvidia network interface. I had no problem booting from the machine and installing the software. As a matter of fact, this is the first time with this particular installation set of cds that I have had this problem. A details aside, I am thinking that the motherboard is having an issue. Thanks for response in advance Jeff K
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?aff99a5941d68bc5351927a9552d3534>