Date: Wed, 30 Dec 2009 14:54:18 -0500 (EST) From: doug@safeport.com To: Warren Block <wblock@wonkity.com> Cc: freebsd-questions@FreeBSD.ORG Subject: xorg-7.4_2 error (was xorg 7.4 questions) Message-ID: <alpine.BSF.2.00.0912301314460.8622@oceanpt.safeport.com> In-Reply-To: <alpine.BSF.2.00.0912290825290.45036@wonkity.com> References: <alpine.BSF.2.00.0912281211530.80053@oceanpt.safeport.com> <alpine.BSF.2.00.0912281135550.40512@wonkity.com> <alpine.BSF.2.00.0912281418450.80053@oceanpt.safeport.com> <alpine.BSF.2.00.0912281346440.41055@wonkity.com> <alpine.BSF.2.00.0912281652410.80053@oceanpt.safeport.com> <alpine.BSF.2.00.0912281504230.41253@wonkity.com> <alpine.BSF.2.00.0912281851160.80053@oceanpt.safeport.com> <alpine.BSF.2.00.0912290825290.45036@wonkity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 29 Dec 2009, Warren Block wrote:
> On Tue, 29 Dec 2009, doug@safeport.com wrote:
>
> [xdm slow startup]
>
>> The answer appears to be to add an empty LISTEN statement to
>> /usr/local/lib/X11/xdm/Xaccess. The xdm package issues a IPV6 DHCP request.
>> While the xdm man page suggests this is not needed:
>>
>> To disable listening for XDMCP connections altogther, a line of
>> LISTEN with no addresses may be specified, or the previously
>> supported method of setting DisplayManager.requestPort to 0 may
>> be used.
>>
>> This seems not to be the case as adding this line gets rid of the long
>> delay and suppresses the IPV6 DHCP request. The DisplayManager.requestPort
>> is set to 0 in the default configuration. This solves the long start (I am
>> pretty sure). Thank you for your suggestions that pushed me to find this.
I was wrong about this. With this change xdm started fine from the command line
and took perhaps even longer when started from /etc/ttys. This describes 7.4_1
behavior.
> Hmm. That sounds like a bug (maybe IPV6 support being added but the feature
> to disable it being forgotten). Does having an IPV6 localhost defined in
> /etc/hosts ("::1 localhost") have the same effect?
>
>> I am also pretty sure my hardware just does not work with hal and dbus.
>
> What keyboard and mouse do you have? Also, which version of FreeBSD are you
> using?
All these issues are with xorg 7.4_1. I have installed xorg-7.4_2 via pkg_add on
a clean system and xdm-1.1.8_2. Nothing else is installed.
Starting xdm gives the following in /var/log/xdm-log:
:
finished PLL1
set RMX
set LVDS
enable LVDS
disable primary dac
disable FP1
disable TV
/libexec/ld-elf.so.1: /usr/local/bin/X: Undefined symbol "shmctl"
xdm error (pid 1416): server unexpectedly died
xdm error (pid 1416): Server for display :0 can't be started, session
disabled
I added one line to the xorg.conf file generated by Xorg -configure:
Option "AutoAddDevices" "false"
A diff shows this file to be exactly what I was using with xorg-7.4_1 (which
works albeit with a very slow startup). I have excerpted various
[relevant] outputs to show my hardware. I needed I can either attach or
include the entire files.
startx works but locks the keyboard. After running fsck scores of times, it
finally occurred to me to ssh into the system so I can force a shutdown. With
both startx (which appears to work) and xdm a reboot is required to recover
the system. Starting xdm get an error logged to STDERR that an IPV6 LISTEN can
not be done.
My laptop is built without IPV6. hal and dbus are not started.
Thanks for any help. This appears to be either an error in the way the package
was build or something I can [hopefully] configure around.
Hardware: IBM thinkpad T42p
dmesg
------
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0
on pci1
:
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
pciconf
------------
hostb0@pci0:0:0:0: class=0x060000 card=0x05291014 chip=0x33408086
rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82855PM Processor to I/O Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x33418086
rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82855PM Processor to AGP Controller'
class = bridge
subclass = PCI-PCI
:
vgapci0@pci0:1:0:0: class=0x030000 card=0x054f1014 chip=0x4e541002
rev=0x80
hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Radeon Mobility M10 NT (RV350-WS)'
class = display
subclass = VGA
_____
Douglas Denault
http://www.safeport.com
doug@safeport.com
Voice: 301-217-9220
Fax: 301-217-9277
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.0912301314460.8622>