Date: Mon, 14 Feb 2011 15:35:16 -0700 (MST) From: Warren Block <wblock@wonkity.com> To: Chris H <chris#@1command.com> Cc: faber@isi.edu, freebsd-stable@freebsd.org Subject: Re: ATI Radeon LW RV200 Mobility 7500 M7 locks up on X exit Message-ID: <alpine.BSF.2.00.1102141526350.12645@wonkity.com> In-Reply-To: <ccf01657a0b306afbd18da26f230839e.HRCIM@webmail.1command.com> References: <20110211191232.GA2073@zod.isi.edu> <86ce5acff788efe61ceabdffe9b194fd.HRCIM@webmail.1command.com> <20110214182159.GB47006@zod.isi.edu> <ccf01657a0b306afbd18da26f230839e.HRCIM@webmail.1command.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 14 Feb 2011, Chris H wrote: > I'm /not/ on a GENERIC kernel, but here are some relevant pieces from > my setup that might help; > rc.conf(5) > hald_enable="NO" > dbus_enable="YES" Half a dozen machines here (roughly, it varies) say that hal is fine. One of those machines is a T42, but needs updating to the latest 8-stable. Apparently I put the significant files on the FLCL site a while back: http://laptop.bsdgroup.de/freebsd/index.html?action=show_laptop_detail&laptop=12947 > xorg.conf(5) > Section "ServerLayout" > Identifier "X.org Configured" > ... > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > > Section "ServerFlags" > Option "AllowEmptyInput" "false" No, please stop doing that. See http://www.wonkity.com/~wblock/docs/html/aei.html > Option "AutoAddDevices" "true" > Option "AutoEnableDevices" "true" These are defaults. > OH, one other thing that comes to mind; > Did you let Xorg(1) create your xorg.conf(8) file? and if so (you /should/ have), > what was the output? Again, if so, is that the conf file you're using now? Sorry, must disagree with that. -configure creates outmoded xorg.conf files, with older options that are either no longer needed or outright obsolete. It also leaves out useful settings.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1102141526350.12645>