Date: Wed, 1 Feb 2012 07:55:03 -0600 (CST) From: "Jeremy C. Reed" <reed@reedmedia.net> To: Bernhard Schmidt <bschmidt@techwires.net> Cc: freebsd-wireless@freebsd.org Subject: Re: iwn Centrino N-1030 Message-ID: <alpine.NEB.2.01.1202010748330.9071@t1.m.reedmedia.net> In-Reply-To: <CAAgh0_b318tL%2BV=QhJdfTHcrK=8umN6NKDGxyOnrDk0t=zA-Pw@mail.gmail.com> References: <alpine.NEB.2.01.1201311545440.4170@t1.m.reedmedia.net> <CAAgh0_b318tL%2BV=QhJdfTHcrK=8umN6NKDGxyOnrDk0t=zA-Pw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 1 Feb 2012, Bernhard Schmidt wrote: > > iwn0: <Intel(R) Centrino(R) Wireless-N 1030> mem 0xf0600000-0xf0601fff irq 17 at device 0.0 on pci2 > > iwn0: attempting to allocate 1 MSI vectors (1 supported) > > msi: routing MSI IRQ 257 to local APIC 0 vector 51 > > iwn0: using IRQ 257 for MSI > > iwn0: MIMO 1T2R, BGN, address ac:72:89:ec:3b:1e > > Strange.. the 1030 is exactly the same as the 6230 (except some small > difference like the number of mimo stream and 5GHz support). The 6230 > is what I'm using daily and that one works great. > > Do you by any chance have a button/switch to disable bluetooth? I'd > play around with that one, maybe I've did something wrong with regard > to bluetooth coexistence. I think the bluetooth switch is the same function button as the wireless switch. When I press it I get: ahcich1: SNTF 0x0001 ubt0: ubt_bulk_read_callback:867: bulk-in transfer failed: USB_ERR_STALLED ubt0: ubt_intr_read_callback:767: interrupt transfer failed: USB_ERR_STALLED ugen2.3: <vendor 0x8086> at usbus2 (disconnected) ubt0: at uhub4, port 5, addr 3 (disconnected) In the case that the wlan0 is up then I also get: iwn0: RF switch: radio disabled (But only if the wlan0 is up I think.) (That ahcich1 I only saw one time, so probably unrelated.) When I press it again (to turn it back on): ugen2.3: <vendor 0x8086> at usbus2 ubt0: <vendor 0x8086 product 0x0189, class 224/1, rev 2.00/69.19, addr 3> on usbus2 When the interface wlan0 is up, I also get: iwn0: RF switch: radio enabled firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at 0xffffffff816120b0 The complete dmesg (boot with verbose) is at: http://reedmedia.net/~reed/tmp/dmesg-dell-inspiron-14z.txt
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.NEB.2.01.1202010748330.9071>