Date: Fri, 14 May 2004 16:34:28 -1000 From: hoe-waa@hawaii.rr.com To: Malcolm Kay <malcolm.kay@internode.on.net> Cc: questions@freebsd.org Subject: Re: mount_msdosfs anomaly Message-ID: <b3c0e6b3c229.b3c229b3c0e6@socal.rr.com>
next in thread | raw e-mail | index | archive | help
-
> On Saturday 15 May 2004 08:59, hoe-waa@hawaii.rr.com wrote:
> > Aloha Again
> >
> > Okay, I had some time and since I had just installed Slackware, I
> didn't> mind blowing it away.
> >
> > Using cfdisk from the Slackware CD, I re-partitioned slices 3
> and up. I
> > now have a fat32 3Gig slice in primary partition/slice ad0s3. I
> then have
> > four 12 Gig slices (5 - 8) set up as linux partitions. Finally
> slice 9
> > (ad0s9/hda9) is linux swap.
> >
>
> Do you still have Fat32 in slice 1?
>
> It is my impression that MS will not allow more than 1 MS primary
> slice. It
> will force 2nd and subsequent MS file systems into extended
> partitions. Of
> course if you created "and formatted" the slice outside of MS then
> the
> comment is irrelevant.
>
> Posting the output of fdisk (on FreeBSD) might help.
>
> Malcolm
>
Aloha Malcolm
Thanks for responding. Here is the output of fdisk when ran from FBSD:
frankie# fdisk
******* Working on device /dev/ad0 *******
parameters extracted from in-core disklabel are:
cylinders=155061 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=155061 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 11 (0x0b),(DOS or Windows 95 with 32 bit FAT)
start 63, size 10249407 (5004 Meg), flag 0
beg: cyl 0/ head 1/ sector 1;
end: cyl 637/ head 254/ sector 63
The data for partition 2 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 10249470, size 40949685 (19994 Meg), flag 80 (active)
beg: cyl 638/ head 0/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 3 is:
sysid 12 (0x0c),(DOS or Windows 95 with 32 bit FAT (LBA))
start 51199155, size 5863725 (2863 Meg), flag 0
beg: cyl 1023/ head 254/ sector 63;
end: cyl 1023/ head 254/ sector 63
The data for partition 4 is:
sysid 5 (0x05),(Extended DOS)
start 57062880, size 99233505 (48453 Meg), flag 0
beg: cyl 1023/ head 254/ sector 63;
end: cyl 1023/ head 254/ sector 63
frankie#
As you can see, I still have 98SE on partition 1 and partition 3 shows as fat32. Slackware was re-installed and is working on P-8 with linux-swap 0n P-9.
Is this weird that I cannot mount ad0s3?
Robert
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b3c0e6b3c229.b3c229b3c0e6>