Date: Sun, 19 Nov 2006 23:06:23 +0100 From: "Claus Guttesen" <kometen@gmail.com> To: freebsd-stable@freebsd.org Subject: Re: Re: hp c class blade Message-ID: <b41c75520611191406y6caf5188i9a401eafafd98f8c@mail.gmail.com> In-Reply-To: <200611171651.kAHGpnd1039957@lurza.secnetix.de> References: <b41c75520611170740y5d46e576s51444ef55610de37@mail.gmail.com> <200611171651.kAHGpnd1039957@lurza.secnetix.de>
next in thread | previous in thread | raw e-mail | index | archive | help
> > I've installed FreeBSD 6.2 RC1 onto a BL460c blade. The installation > > itself went fine, but there is no network. The nic is on a broadcom 16 > > ports GB switch on the backside of the blade-chassis. > > What kind of NIC is it? Type "pcicinf -lv" and look for it. > If you tell us the name, vendor ID and device ID (or even > better, the whole section from pciconf output), someone > might be able to tell you details about the support status > of it in FreeBSD. After reading http://www.mail-archive.com/freebsd-stable@freebsd.org/msg83981.html I added: { BRCM_VENDORID, BRCM_DEVICEIDBCM7808S, HP_VENDORID, 0x16AC, "HP ... ADAPTER" }, to /usr/src/sys/dev/bce/if_bce.c. After reboot I get SerDes controllers not supported in dmesg, device_attach: bce0 attach returned 19. Pciconf -lv says: bce0@pci7:0:0: class=0x020000 card=0x703b103c chip=0x16ac14e4 rev=0x11 hdr=0x00 vendor = Broadcom Corporation' class = networl subclass = ethernet bce1 likewise. There doesn't seem to be any available drivers atm. I (even :-)) tried ubuntu 6.10 server (amd64) and it didn't detect any network-cards either. The switch is a 16 ports gb passthrough switch. regards Claus
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b41c75520611191406y6caf5188i9a401eafafd98f8c>